SWD

Open-source voltage glitching tool for hardware security research, based on Raspberry Pi Pico 2 (RP2350) with dual high-power MOSFETs, 4 selectable voltage levels, and adjustable Schmitt trigger input

Popular low-cost development board based on the STM32F103C8T6 ARM Cortex-M3 microcontroller running at 72 MHz. Features 64 KB flash, 20 KB SRAM, and extensive peripheral support for embedded developme

ESP32-S2-based WiFi development board for Flipper Zero enabling wireless firmware updates, Black Magic Probe debugging over USB and WiFi, and WiFi pentesting with PMKID capture and deauth capabilities

Ultra-small (20x20mm), ultra-low-power LoRa/LoRaWAN + concurrent GNSS asset tracker by Tlera Corp, built on the Murata CMWX1ZZABZ-078 module with STM32L082 MCU, SX1276 LoRa radio, u-blox MAX-M8Q GNSS,

Ultra-compact 18x45mm LoRaWAN development board from Tlera Corp featuring Murata's FCC-certified CMWX1ZZABZ-078 module with STM32L082 Cortex-M0+ MCU and SX1276 LoRa radio, drawing just 2 uA in stop mo

Open-source multi-protocol wireless USB dongle based on the Nordic nRF52840 SoC. Supports BLE 5.4, Thread, Zigbee, 802.15.4, NFC, and USB 2.0 with UF2 drag-and-drop bootloader. Priced at $12.99.

A compact USB-A development board and debugging tool built around the RP2040 dual-core Cortex-M0+ MCU, featuring a 1.14-inch IPS LCD, microSD card slot, and exposed SWD, UART, and I2C connectors for p

High-performance Arduino-compatible board powered by the NXP iMX RT1011 Cortex-M7 at 500 MHz, with 8MB QSPI flash, microSD slot, STEMMA QT, and USB-C.

Arduino-Uno-compatible development board powered by the RP2040 with 16MB QSPI flash, microSD slot, STEMMA QT, onboard NeoPixel, USB-C, and an RX/TX switch for serial flexibility.

Ultra-low-power LoRaWAN development kit based on STM32L151CBU6 ARM Cortex-M3 MCU and Semtech SX1278 LoRa transceiver, with 6uA deep sleep current, integrated battery management, and CE certification.

Arduino-Uno-compatible board with RP2350, dual ARM Cortex-M33 at 150 MHz, 520KB SRAM, 16MB QSPI flash, microSD, HSTX port, 23 GPIO on headers, NeoPixel, STEMMA QT, and USB-C.

Ultra-compact LoRa/LoRaWAN module based on the ASR6502 SoC (ARM Cortex-M0+ @ 48MHz + SX1262), designed for SMT integration into custom IoT sensor nodes with 3.5uA deep sleep current.

Ultra-low power LoRa/LoRaWAN development board based on the ASR6502 SiP (ARM Cortex-M0+ @ 48MHz + SX1262), with USB-C, solar panel support, and 3.5uA deep sleep current. Ideal for remote environmental

Ultra-low-power LoRa/LoRaWAN development node based on the ASR6502 SoC (ARM Cortex-M0+ @ 48MHz + SX1262), with a built-in 1/2AA battery holder, 3.5uA deep sleep, and Arduino compatibility. Ideal for r

LoRa + GPS development board based on ASR6502 SiP (ARM Cortex-M0+ with SX1262), featuring integrated AIR530Z GPS/BeiDou module, 0.96" OLED display, solar charging, and ultra-low 21uA deep sleep curren

Ultra-compact 18x18mm LoRa/LoRaWAN module based on the ASR6502 SiP with integrated ARM Cortex-M0+ MCU and Semtech SX1262 transceiver. Features 3.5uA deep sleep, Arduino compatibility, and CE/FCC certi

Heltec CubeCell HTCC-AB02 is an ultra-low-power LoRa/LoRaWAN development board based on the ASR6502 SoC (ARM Cortex-M0+ with integrated SX1262), featuring a 0.96" OLED display, solar panel input, and