LoRa

LILYGO LoRa3 (T3 LoRa32 V1.6.1) is an ESP32 development board combining Wi-Fi, BLE, and LoRa radio (SX1276/SX1278) with OLED display and TF card slot for IoT and mesh networking.

LILYGO LoRa V1.3 is an ESP32 development board with SX1276 LoRa radio at 868/915 MHz, optional 0.96-inch OLED display, Wi-Fi, BLE, and 4MB flash for IoT and LoRa applications.

Open-source 1U CubeSat educational kit powered by Arduino Pro Mini with LoRa communication, multi-sensor payload (IMU, barometer, GPS, temperature), solar-powered EPS, and ground station dashboard for

Long-range LoRa transceiver module with Semtech SX1262, UART interface, 1W output power, and up to 16km range at 210-241MHz. Ideal for remote telemetry and agricultural IoT.

Intelligent wireless LoRaWAN DTU with isolated RS485 interface, powered by STM32WLE5CCU6 ARM Cortex-M4 MCU with integrated Sub-GHz radio. Wide 6-36V input for industrial deployment.

ATmega32u4 Feather board with RFM95W SX1276 LoRa radio for 868/915 MHz long-range communication. Achieves 2+ km range, supports spreading factors SF6-SF12, and includes a built-in LiPo charger.

ATmega32u4 Feather board with RFM96W SX1278 LoRa radio for 433 MHz long-range communication. Achieves 2+ km range with quarter-wave antennas, supports LoRaWAN, and includes a built-in LiPo charger.

Five-network ESP32 MicroPython board with WiFi, Bluetooth LE, LoRa, SigFox, and dual LTE-M (CAT-M1/NB1). 4MB RAM, 8MB flash, 22 GPIO. The most connected Pycom module for versatile LPWAN IoT applicatio

ESP32-based quad-network MicroPython board with WiFi, Bluetooth LE, LoRa (SX1276 868/915/433MHz), and SigFox. 4MB PSRAM, 8MB flash, 24 GPIO. Can function as a nano LoRa gateway. FCC/CE certified.

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM95W SX1276 LoRa radio for 868/915 MHz. Achieves 2+ km range, supports LoRaWAN, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

ATSAMD21G18 ARM Cortex-M0+ Feather board with RFM96W SX1278 LoRa radio for 433 MHz. Achieves 2+ km range, supports LoRaWAN, 256KB flash, 32KB RAM, native USB, and built-in LiPo charger.

ESP32-based MicroPython module combining 802.11b/g/n WiFi, Bluetooth, and LoRa/LoRaWAN (868/915 MHz) in one board. Can act as a nano LoRa gateway and is 100% Python programmable for multi-protocol IoT

The Pycom LoPy is a compact triple-network MicroPython-programmable board featuring ESP32 with built-in WiFi, BLE 4.2, and LoRa (SX1272) on 868/915 MHz — ideal for IoT mesh networking and asset tracki

ESP32 + SX1276 LoRa multi-protocol bridge in an aluminum enclosure, converting between WiFi, Bluetooth, and LoRa with 8MB flash and 8MB PSRAM.

A compact, wall-mountable single-channel LoRaWAN gateway based on the HT-CT62 module (ESP32-C3 + SX1262). Designed for indoor use with a built-in PCB antenna, it can listen to over a dozen LoRa nodes

Heltec CubeCell HTCC-AB02 is an ultra-low-power LoRa/LoRaWAN development board based on the ASR6502 SoC (ARM Cortex-M0+ with integrated SX1262), featuring a 0.96" OLED display, solar panel input, and