# device — Open Hardware Directory

> **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link.

**13 device listed.**

## CUBEEK CubeSat Educational Kit

Open-source 1U CubeSat educational kit powered by Arduino Pro Mini with LoRa communication, multi-sensor payload (IMU, barometer, GPS, temperature), solar-powered EPS, and ground station dashboard for learning satellite engineering.

[Details](https://openhardware.directory/devices/cubeek-cubesat-educational-kit) | [Markdown](https://openhardware.directory/devices/cubeek-cubesat-educational-kit/md)

## AVR-HF ADX-MI3

Pre-built digital mode QRP transceiver for amateur radio, supporting FT8, FT4, JS8, and WSPR on HF bands from 160m to 6m with ~5W output, OLED display, and single USB-C cable operation.

[Details](https://openhardware.directory/devices/avr-hf-adx-mi3) | [Markdown](https://openhardware.directory/devices/avr-hf-adx-mi3/md)

## DFRobot Beetle BLE

Ultra-compact Arduino Uno-compatible board with BLE 4.0 (CC2540), ATmega328P, sewable gold-plated I/O pads, and wireless programming in a 28.8x33.1mm wearable form factor.

[Details](https://openhardware.directory/devices/dfrobot-beetle-ble) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-ble/md)

## DFRobot FireBeetle 328P BLE 4.1

Low-power Arduino-compatible board with ATmega328P and Dialog BLE 4.1 chip, featuring 14 digital I/O, 6 analog inputs, wireless OTA programming, 25uA deep sleep, onboard LiPo charging, and dual interrupt wakeup in a compact 58x29mm form factor.

[Details](https://openhardware.directory/devices/dfrobot-firebeetle-328p-ble) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-328p-ble/md)

## Adafruit METRO 328

Arduino UNO-compatible development board built around the ATmega328P at 16 MHz with 32KB flash, micro USB, and Adafruit's signature black PCB with gold-plated pads.

[Details](https://openhardware.directory/devices/adafruit-metro-328) | [Markdown](https://openhardware.directory/devices/adafruit-metro-328/md)

## Arduino Uno Ethernet

Arduino UNO with built-in Ethernet and microSD slot based on the ATmega328P at 16 MHz — a self-contained board for networked Arduino projects without needing a separate Ethernet shield.

[Details](https://openhardware.directory/devices/arduino-uno-ethernet) | [Markdown](https://openhardware.directory/devices/arduino-uno-ethernet/md)

## Adafruit Pro Trinket 5V

Compact ATmega328P-based Arduino-compatible board at 16 MHz, 5V, with 28KB flash, 18 GPIO, Micro USB, FTDI header, and mounting holes — a miniaturized UNO with battery-friendly power management.

[Details](https://openhardware.directory/devices/adafruit-pro-trinket-5v) | [Markdown](https://openhardware.directory/devices/adafruit-pro-trinket-5v/md)

## Adafruit Metro Mini 328 V2

Breadboard-friendly ATmega328P Arduino-compatible board at 16 MHz, 5V, with USB-C, STEMMA QT I2C port, 32KB flash, and CP2102N USB-serial chip — a compact modern drop-in for the Arduino UNO.

[Details](https://openhardware.directory/devices/adafruit-metro-mini-328) | [Markdown](https://openhardware.directory/devices/adafruit-metro-mini-328/md)

## Arduino UNO Mini Limited Edition

Miniaturised collector's Arduino UNO with ATmega328P at 16 MHz in a 34.2 × 26.7 mm form factor with USB-C, individually numbered and signed by Arduino's founders.

[Details](https://openhardware.directory/devices/arduino-uno-mini-limited-edition) | [Markdown](https://openhardware.directory/devices/arduino-uno-mini-limited-edition/md)

## Arduino Uno R3

The quintessential beginner microcontroller board with ATmega328P @ 16MHz, 32KB Flash, 2KB SRAM, 14 digital I/O, 6 analog inputs, USB-B for programming, DC barrel jack, and the R3 expanded shield header. Open-source hardware.

[Details](https://openhardware.directory/devices/arduino-uno-r3) | [Markdown](https://openhardware.directory/devices/arduino-uno-r3/md)

## DC Boarduino

The DC Boarduino is a slim, breadboard-friendly Arduino-compatible development board based on the ATmega328 at 16MHz, with a 2.1mm DC barrel jack for 7–17V input, USB-TTL serial header, ICSP programming port, and a form factor optimized for direct breadboard insertion.

[Details](https://openhardware.directory/devices/dc-boarduino) | [Markdown](https://openhardware.directory/devices/dc-boarduino/md)

## Arduino Uno Rev3

The original Arduino UNO — the world's most popular development board with ATmega328P at 16MHz, 32KB flash, 2KB SRAM, 14 digital I/O (6 PWM), 6 analog inputs, USB-B, and 5V operation. The gateway to electronics and programming for millions.

[Details](https://openhardware.directory/devices/arduino-uno-rev3) | [Markdown](https://openhardware.directory/devices/arduino-uno-rev3/md)

## Arduino Nano

The classic breadboard-friendly Arduino — ATmega328P at 16MHz, 32KB flash, 2KB SRAM, 14 digital I/O (6 PWM), 8 analog inputs, Mini-B USB, and 5V operation in a tiny 45×18mm form factor. The compact original.

[Details](https://openhardware.directory/devices/arduino-nano) | [Markdown](https://openhardware.directory/devices/arduino-nano/md)