LILYGO T-Display P4 - image 1
1 / 7
LILYGO·ESP32 P4

LILYGO T-Display P4

High-performance ESP32-P4 development board with dual-core 360MHz RISC-V, 4.1" AMOLED or 4.05" TFT touchscreen, 2MP camera, SX1262 LoRa, GPS, 9-axis IMU, and ESP32-C6 for Wi-Fi 6 and Bluetooth 5.

Starting from

$97.40

Compatible Firmware

Specifications

ArchitectureRISC-V
CPU Cores2
Clock Speed360MHz
PSRAM32MB
Flash16MB
GPIO Level3.3V
Power Input5V
BluetoothBLE 5.0
AntennaU.FL/IPEX
StoragemicroSD
Dimensions63 x 109 x 22mm

Components

Dual-core RISC-V 360MHz + 40MHz high-performance application processor with 32MB PSRAM

Wi-Fi 6 and Bluetooth 5 LE wireless co-processor

Long-range LoRa radio transceiver available in 868/915/920MHz variants

Multi-constellation GNSS module for GPS positioning

9-Axis IMUAccelerometerDatasheet

9-axis MEMS IMU with accelerometer, gyroscope, and magnetometer plus onboard DMP

2MP MIPI camera sensor capable of 1080p@30fps and 720p@60fps

Battery ChargerBattery ChargerDatasheet

Linear Li-ion battery charge controller for 18650 cell charging

I2C battery gas gauge for accurate state-of-charge measurement

16-bit I2C GPIO expander providing 24-pin expansion

Bus Interfaces

I2C
SPI
UART
I2S
MIPI CSI

Overview

The LILYGO T-Display P4 is a powerful development board built around Espressif's ESP32-P4, a dual-core 360MHz RISC-V chip with a secondary 40MHz core, paired with an ESP32-C6 co-processor for Wi-Fi 6 and Bluetooth 5 LE. It features 16MB Flash and 32MB PSRAM, a 4.1" AMOLED or 4.05" TFT capacitive touchscreen (punch-hole design), a 2MP OV2710 MIPI camera capable of 1080p@30fps, SX1262 LoRa module in multiple frequency variants, L76K GPS module, 9-axis ICM20948 IMU, I2S speaker and microphone, LGs4056H battery charger with BQ27220 battery gauge, and XL9535 16-bit GPIO expander. Power is managed via USB at 5V/500mA and the board measures 63×109×22mm.

Use Cases

5

Resources

Where to Buy

Explore more of the directory — popular use cases, firmware, and specs to browse next.