LILYGO T-TWR Rev2.1 - image 1
1 / 6
LILYGO·Dev Board

LILYGO T-TWR Rev2.1

LILYGO T-TWR Rev2.1 is an ESP32-S3 based programmable walkie-talkie board featuring the SA868 UHF/VHF radio module, GPS, OLED display, and battery support for amateur radio applications.

Starting from

$48.99

Compatible Firmware

Specifications

Components

Main MCUMCUDatasheet

ESP32-S3 dual-core LX7 module with 16MB flash, 8MB PSRAM, Wi-Fi and Bluetooth 5 LE

SA868 UHF/VHF radio module available in 400-480 MHz (UHF) or 134-174 MHz (VHF) variants for amateur radio and walkie-talkie applications

Quectel L76K GNSS module supporting GPS, BDS, and GLONASS with built-in LNA, SAW filter, AGNSS, and 1PPS output

OLED Display DriverDisplay DriverDatasheet

1.3 inch OLED display driver with 128x64 resolution connected via I2C (SDA: IO08, SCL: IO09)

AXP2102 PMU for battery charging and power distribution across the board

Bus Interfaces

I2C
SPI
UART
GPIO

Overview

The LILYGO T-TWR Rev2.1 is revision 2.1 of the T-TWR programmable walkie-talkie platform. It uses the ESP32-S3-WROOM-1-N16R8 module (16MB flash, 8MB PSRAM) paired with the SA868 UHF/VHF transceiver module available in 400–480 MHz or 134–174 MHz variants. A Quectel L76K GNSS module provides GPS, BDS, GLONASS positioning. The 1.3" SH1106 OLED display with 128×64 resolution is included for status display. Power is provided via USB, 21700, or 18650 battery. Onboard features include a PMU AXP2102, TF card slot, WS2812 RGB LED, and 4 buttons. Compatible with SoftRF Ham Edition, OpenRTX, ESP32APRS, and ArcticTracker firmware. Note: OpenRTX currently only supports version 2.0, not 2.1.

Use Cases

5

Resources

Where to Buy

Explore more of the directory — popular use cases, firmware, and specs to browse next.