# device — Open Hardware Directory

> **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link.

**5 device listed.**

## LILYGO T-TWR Plus

Enhanced ESP32-S3 two-way radio board with SA868 UHF/VHF module, L76K GNSS, 1.3" OLED, AXP2102 PMIC, WS2812 RGB LED, TF card, and PPT button for APRS and walkie-talkie applications.

[Details](https://openhardware.directory/devices/lilygo-t-twr-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-twr-plus/md)

## LILYGO T-TWR Rev2.1

LILYGO T-TWR Rev2.1 is an ESP32-S3 based programmable walkie-talkie board featuring the SA868 UHF/VHF radio module, GPS, OLED display, and battery support for amateur radio applications.

[Details](https://openhardware.directory/devices/lilygo-t-twr-rev2-1) | [Markdown](https://openhardware.directory/devices/lilygo-t-twr-rev2-1/md)

## LILYGO TO-ESP8266 OLED SH1106

ESP8266 development board with 1.3-inch SH1106 OLED display, 8 digital I/O pins, CH9102 USB-serial, 3.3V operation, WiFi 802.11 b/g/n, and JST 1.25mm LiPo connector — supports ESPHome and Tasmota firmware.

[Details](https://openhardware.directory/devices/lilygo-to-esp8266-oled-sh1106) | [Markdown](https://openhardware.directory/devices/lilygo-to-esp8266-oled-sh1106/md)

## 1.3" OLED I2C Display (128x64)

Larger 1.3-inch monochrome OLED display with 128x64 pixel resolution and SH1106 driver IC. I2C interface with improved readability over smaller 0.96" modules, great for dashboards and readouts.

[Details](https://openhardware.directory/devices/oled-13-inch-i2c-display) | [Markdown](https://openhardware.directory/devices/oled-13-inch-i2c-display/md)

## Adafruit MACROPAD RP2040

RP2040-powered 3×4 mechanical macropad with 12 NeoPixels, a 128×64 OLED display, rotary encoder, speaker, and STEMMA QT — fully programmable via CircuitPython or Arduino.

[Details](https://openhardware.directory/devices/adafruit-macropad-rp2040) | [Markdown](https://openhardware.directory/devices/adafruit-macropad-rp2040/md)