RISC-V 32-bit

LILYGO T8-C3 is a compact ESP32-C3 development board featuring Wi-Fi, BLE 5.0, 4MB flash, TF card slot, and USB Type-C, requiring the T-U2T adapter for programming.

LILYGO T-OI Plus is a compact ESP32-C3 development board with Wi-Fi, BLE 5.0, Grove connectors, and optional 16340 battery holder, designed to fit Sonoff BASICR2 enclosures.

LILYGO T-01C3 is an ultra-compact ESP32-C3 RISC-V module with Wi-Fi and BLE 5.0, available with or without pre-soldered pins, featuring 5.33µA deep sleep current.

Coin-sized ESP32-C3 RISC-V IoT development board with WiFi, BLE 5.0, integrated LiPo charging, 13 GPIO pins, and USB-C in a 25x20.5mm form factor.

Espressif ESP32-C6 WROOM module with 8MB flash and PCB antenna, supporting Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread — for soldering onto custom IoT hardware.

Espressif ESP32-C6 WROOM module with 4MB flash and PCB antenna, supporting Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread — for soldering onto custom IoT hardware.

Espressif reference development board for the ESP32-C6 with 8MB flash, Wi-Fi 6, Bluetooth 5 LE, Zigbee 3.0, Thread, RGB LED, dual USB-C ports, and full GPIO breakout.

Espressif development board for the ESP32-H2 with Bluetooth 5 LE, Zigbee 3.0, Thread, and Matter support, 4MB flash, USB-C, RGB LED, and full GPIO breakout — no Wi-Fi.

Espressif ESP32-H2 MINI module with 4MB flash and PCB antenna, supporting Bluetooth 5 LE, Zigbee 3.0, Thread, and Matter — a compact bare module for custom PCB designs without Wi-Fi.

Espressif RISC-V dev board optimized for Rust programming, featuring ESP32-C3-MINI-1 with 4MB flash, Wi-Fi, BT5, onboard ICM-42670-P IMU, SHTC3 temperature/humidity sensor, and USB-C.

Espressif official RISC-V ESP32-C3 dev board with ESP32-C3-MINI-1 module, 4 MB embedded SPI Flash, WiFi 4, BLE 5, Micro-USB, RGB LED, and a compact footprint for IoT prototyping.

Tiny RISC-V ESP32-C3 dev board in the QT Py / Seeed XIAO footprint with 4 MB flash, WiFi, BLE 5 with Mesh, STEMMA QT, 13 GPIO, 5 ADC inputs, and USB-C — no native USB.

Official Espressif development board featuring the ESP32-C6 — a RISC-V single-core MCU with WiFi 6, BLE 5.0, Zigbee 3.0, Thread 1.3, and native Matter support. 8MB flash, USB-C JTAG/serial.

Official Espressif development board for the ESP32-H2 — a RISC-V MCU purpose-built for 802.15.4 wireless protocols: BLE 5.3, Zigbee 3.0, Thread 1.3, and Matter. No WiFi. 4MB flash, USB-C with CH343P.

Open-source RISC-V evaluation board powered by the Bouffalo Lab BL602 WiFi+BLE5 SoC. Features 276KB SRAM, 2MB flash, USB-C with CH340 serial bridge, onboard RGB LED, JTAG header, and PCB antenna. Supp

Ultra-compact BL602 RISC-V WiFi+BLE5 IoT module in ESP-01S form factor with 8-pin through-hole header. Features 276KB SRAM, 2MB flash, onboard RGB LED, and PCB antenna. Supports Arduino, NuttX, FreeRT

BL602 RISC-V WiFi+BLE5 stamp module with 16 castellated pads for SMT integration. Exposes 11 GPIOs with SPI, I2C, UART, SDIO, JTAG, ADC, and DAC. Features 276KB SRAM, 2MB flash, and PCB antenna. Price