# device — Open Hardware Directory

> **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link.

**8 device listed.**

## iCESugar-Pro FPGA Development Board

Open-source Lattice ECP5 FPGA dev board with 24K LUTs, 32MB SDRAM, 32MB SPI flash, 106 GPIO pins in DDR SODIMM form factor. Supports fully open-source toolchain (Yosys + Nextpnr) and RISC-V Linux.

[Details](https://openhardware.directory/devices/icesugar-pro) | [Markdown](https://openhardware.directory/devices/icesugar-pro/md)

## UPduino v3.1

A low-cost, fully open source FPGA development board built on the Lattice ICE40UP5K with 5.3K LUTs, on-board FTDI FT232H USB programmer, 4MB qSPI flash, and 39 GPIO pins on PMOD-compatible headers.

[Details](https://openhardware.directory/devices/upduino-v3-1) | [Markdown](https://openhardware.directory/devices/upduino-v3-1/md)

## Waveshare RP2040-GEEK

A compact USB-A development board and debugging tool built around the RP2040 dual-core Cortex-M0+ MCU, featuring a 1.14-inch IPS LCD, microSD card slot, and exposed SWD, UART, and I2C connectors for programming ARM microcontrollers.

[Details](https://openhardware.directory/devices/waveshare-rp2040-geek) | [Markdown](https://openhardware.directory/devices/waveshare-rp2040-geek/md)

## LuckFox Pico WebBee

Ultra-compact Rockchip RV1103 Linux micro development board in USB dongle form factor with 10/100Mbps Ethernet, 64MB DDR2, 128MB NAND flash, and ABS protective case. Ideal for lightweight web servers, USB scripting, and smart home IoT.

[Details](https://openhardware.directory/devices/waveshare-luckfox-webbee) | [Markdown](https://openhardware.directory/devices/waveshare-luckfox-webbee/md)

## Waveshare RP2350-One

Ultra-compact USB-A plug-and-play development board with the Raspberry Pi RP2350A dual-architecture MCU, 4MB flash, WS2812 RGB LED, castellated module design, and 29 GPIO pins in a tiny 18 x 25.5mm form factor.

[Details](https://openhardware.directory/devices/waveshare-rp2350-one) | [Markdown](https://openhardware.directory/devices/waveshare-rp2350-one/md)

## Waveshare RP2040-PiZero

A Raspberry Pi Zero form-factor development board based on the RP2040 dual-core Cortex-M0+ MCU with 16MB flash, Mini HDMI (DVI) output via PIO bitbanging, USB-C, PIO-USB host port, microSD card slot, LiPo battery charging, and a 40-pin Raspberry Pi-compatible GPIO header.

[Details](https://openhardware.directory/devices/waveshare-rp2040-pizero) | [Markdown](https://openhardware.directory/devices/waveshare-rp2040-pizero/md)

## Heltec Vision Master E290

ESP32-S3 development board with 2.9-inch e-ink display and optional SX1262 LoRa radio, featuring Raspberry Pi GPIO header, Meshtastic support, and 18uA deep sleep for battery-powered IoT and mesh networking applications.

[Details](https://openhardware.directory/devices/heltec-vision-master-e290) | [Markdown](https://openhardware.directory/devices/heltec-vision-master-e290/md)

## Heltec Mesh Node T114

Compact nRF52840 + SX1262 LoRa development board with BLE 5.0, optional 1.14" TFT display and L76K GPS module. Designed for Meshtastic mesh networking, LoRaWAN, and battery-powered IoT deployments with ultra-low 11uA deep sleep current and solar panel support.

[Details](https://openhardware.directory/devices/heltec-mesh-node-t114) | [Markdown](https://openhardware.directory/devices/heltec-mesh-node-t114/md)