MQTT

Ultra-compact ESP32 development board with W5500 SPI Ethernet, 0.96" OLED display, Wi-Fi, Bluetooth 4.2, and USB-C. Only 29.5×23mm for embedded IoT gateway projects.

Open-source ESP32-S3 camera board with PoE, microSD, and Stemma QT designed for AI-powered utility meter reading using the AI-on-the-edge-device firmware with TensorFlow Lite inference.

Open-source ESP32-S3 WiFi controller for Daikin air conditioners with local-only control via MQTT and Home Assistant. Replaces cloud-dependent Daikin WiFi modules with privacy-first, no-internet-requi

Open-source ESP-based communication PCB for local monitoring and control of Panasonic Aquarea heat pumps via MQTT and HTTP, with Home Assistant integration and S0 energy metering support.

ESP32-C3 based WiFi/BLE smart relay module with 16A switching capacity, dry contact input, and compact DIN-rail or in-wall form factor. Flashable with Tasmota or ESPHome for local smart home control.

ESP32-based smart wall switch with 3.5-inch capacitive touchscreen, dual relay outputs, temperature sensor, and buzzer. Flashable with Tasmota for custom LVGL/Berry interfaces and Home Assistant integ

Ultra-compact ESP32-C3 WiFi smart switch module with 10A relay, detached switch mode, and the smallest form factor in its class. Fits any wall box. Flashable with Tasmota for local control.

ESP32-based dual-relay WiFi/BLE smart switch with per-channel power monitoring via ADE7953, cover/shutter control mode, and 10A per channel. Flashable with Tasmota for local roller blind and dual ligh

ESP32-based WiFi smart switch with high-accuracy power monitoring via CSE7766, 16A relay, LCD display, and DIN-rail mounting. Flashable with Tasmota for local energy tracking and home automation.

ESP32-based dual-relay WiFi smart switch with per-channel power monitoring, roller shutter mode, and 2×10A outputs. Ideal for motorized blinds with Tasmota shutter calibration and position tracking.

ESP32-based Zigbee-to-WiFi gateway with CC2652P coordinator chip supporting 128 Zigbee devices. Flashable with Tasmota for local Zigbee bridge operation with Home Assistant via MQTT.

Open-source ESP32 development board with built-in Ethernet, Power-over-Ethernet support, micro-SD card slot, and LiPo battery connector. Ideal for wired Tasmota nodes and industrial IoT applications.

Linux-based IoT hub with Allwinner T113-S3 dual-core ARM Cortex-A7 SoC, LoRa (SX1262), WiFi, Ethernet, and optional LTE. Runs Debian 10 with a dedicated IoT OS, CLI, and web UI for no-code device mana

Intelligent power management module with ESP8684 MCU, 4MB flash, 2.4GHz WiFi, and dual USB outputs. Enables remote power control, consumption monitoring, countdown shutdown, and Home Assistant integra