GPS

ESP32-S3 handheld dev board with QWERTY keyboard, trackball, 2.8" IPS LCD, LoRa SX1262, GPS, speaker, dual microphones, and 2000mAh battery in an ABS case.

ESP32 development board combining LoRa radio (SX1276/SX1278), u-blox NEO-6M GPS, 0.96" OLED display, and 18650 battery support — the go-to board for Meshtastic and LoRa tracking projects.

nRF52840 + SX1262 LoRa + L76K GPS all-in-one board with 1.54-inch e-paper display, 850mAh battery, Thread, Zigbee, and BLE 5.0 — runs Meshtastic, SoftRF, and custom NRF firmware out of the box.

Upgraded T-Beam with ESP32-S3FN8, QMI8658 6-axis IMU, LoRa SX1262, dual GPS options (L76K or u-blox), SoftRF firmware support, and multi-frequency bands for Meshtastic and aircraft tracking.

Compact LoRa pager with ESP32-S3, 2.33" touchscreen, QWERTY keyboard, u-blox GNSS, BHI260AP AI IMU, ES8311 audio codec, RFID/NFC, and foldable antenna for off-grid messaging.

Enhanced ESP32-S3 two-way radio board with SA868 UHF/VHF module, L76K GNSS, 1.3" OLED, AXP2102 PMIC, WS2812 RGB LED, TF card, and PPT button for APRS and walkie-talkie applications.

Enhanced T-Echo with nRF52840, SX1262 LoRa, L76K GPS, BHI260AP IMU, 2400mAh battery, 1.54-inch e-paper display, vibration motor, buzzer, and 1/4-inch mount — Meshtastic-ready with extended runtime.

Simplified T-Echo with nRF52840, SX1262 LoRa, and optional L76K GPS — a low-cost, low-power LoRa node and Meshtastic-compatible board for off-grid mesh networking.

LILYGO T-TWR Rev2.1 is an ESP32-S3 based programmable walkie-talkie board featuring the SA868 UHF/VHF radio module, GPS, OLED display, and battery support for amateur radio applications.

High-performance ESP32-P4 development board with dual-core 360MHz RISC-V, 4.1" AMOLED or 4.05" TFT touchscreen, 2MP camera, SX1262 LoRa, GPS, 9-axis IMU, and ESP32-C6 for Wi-Fi 6 and Bluetooth 5.

ESP32 + SX1276 LoRa T-Beam variant optimized for the Helium IoT network — with NEO-6M GPS, AXP2101 PMU, and 18650 battery support for portable LoRaWAN network mapping and sensor nodes.

Open-source 1U CubeSat educational kit powered by Arduino Pro Mini with LoRa communication, multi-sensor payload (IMU, barometer, GPS, temperature), solar-powered EPS, and ground station dashboard for

Ultra-small (20x20mm), ultra-low-power LoRa/LoRaWAN + concurrent GNSS asset tracker by Tlera Corp, built on the Murata CMWX1ZZABZ-078 module with STM32L082 MCU, SX1276 LoRa radio, u-blox MAX-M8Q GNSS,

Compact Meshtastic LoRa transceiver with nRF52840, SX1262, 1.54\" e-paper display, GPS, and 1200mAh battery for off-grid mesh communication.

Compact Meshtastic-compatible LoRa communicator with push-button keyboard, built around the Heltec Wireless Tracker with ESP32-S3, SX1262 LoRa, GPS, and a 0.96" TFT display for off-grid mesh messaging

GPS/GNSS tracking expansion board for Pycom modules with GLONASS/Galileo/QZSS support, 3-axis accelerometer, MicroSD slot, LiPo charger, USB serial, and 5 extra GPIO headers. Ultra-low 1µA deep sleep

LoRa + GPS development board based on ASR6502 SiP (ARM Cortex-M0+ with SX1262), featuring integrated AIR530Z GPS/BeiDou module, 0.96" OLED display, solar charging, and ultra-low 21uA deep sleep curren

ESP32-S3 development board with SX1262 LoRa (28dBm), UC6580 dual-frequency GNSS, 0.96" TFT display, solar charging, and Meshtastic/MeshCore support for GPS tracking and mesh networking.

ESP32-S3 development board with integrated SX1262 LoRa transceiver, UC6580 dual-frequency GNSS receiver, and 0.96-inch TFT display for IoT asset tracking, Meshtastic mesh networking, and LoRaWAN appli

Ultra-compact IP65 waterproof LoRa sensor capsule with ESP32-S3, SX1262 LoRa, GNSS, temperature/humidity, barometric pressure, and 3-axis accelerometer. Meshtastic-compatible with 250mAh battery and o

Compact nRF52840 + SX1262 LoRa development board with BLE 5.0, optional 1.14" TFT display and L76K GPS module. Designed for Meshtastic mesh networking, LoRaWAN, and battery-powered IoT deployments wit