# device — Open Hardware Directory

> **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link.

**12 device listed.**

## LILYGO T-Deck Plus

ESP32-S3 handheld dev board with QWERTY keyboard, trackball, 2.8" IPS LCD, LoRa SX1262, GPS, speaker, dual microphones, and 2000mAh battery in an ABS case.

[Details](https://openhardware.directory/devices/lilygo-t-deck-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-deck-plus/md)

## LILYGO T-Pico C3

Dual-MCU board combining RP2040 and ESP32-C3, with a 1.14-inch ST7789V display, WiFi, BLE 5.0, and Arduino/MicroPython support — bringing Raspberry Pi Pico connectivity to wireless IoT projects.

[Details](https://openhardware.directory/devices/lilygo-t-pico) | [Markdown](https://openhardware.directory/devices/lilygo-t-pico/md)

## LILYGO T-Deck

ESP32-S3 handheld terminal with 2.8-inch IPS display, mini QWERTY keyboard, trackball, optional SX1262 LoRa, speaker, and microphone — a self-contained portable communicator running Meshtastic and MeshCore.

[Details](https://openhardware.directory/devices/lilygo-t-deck) | [Markdown](https://openhardware.directory/devices/lilygo-t-deck/md)

## LILYGO T8-C3

LILYGO T8-C3 is a compact ESP32-C3 development board featuring Wi-Fi, BLE 5.0, 4MB flash, TF card slot, and USB Type-C, requiring the T-U2T adapter for programming.

[Details](https://openhardware.directory/devices/lilygo-t8-c3) | [Markdown](https://openhardware.directory/devices/lilygo-t8-c3/md)

## LILYGO T-OI Plus

LILYGO T-OI Plus is a compact ESP32-C3 development board with Wi-Fi, BLE 5.0, Grove connectors, and optional 16340 battery holder, designed to fit Sonoff BASICR2 enclosures.

[Details](https://openhardware.directory/devices/lilygo-t-oi-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-oi-plus/md)

## LILYGO T-01C3

LILYGO T-01C3 is an ultra-compact ESP32-C3 RISC-V module with Wi-Fi and BLE 5.0, available with or without pre-soldered pins, featuring 5.33µA deep sleep current.

[Details](https://openhardware.directory/devices/lilygo-t-01c3) | [Markdown](https://openhardware.directory/devices/lilygo-t-01c3/md)

## LILYGO T-Keyboard

Compact ESP32-C3 keyboard terminal with a built-in 0.99" display, Wi-Fi, Bluetooth 4.2, 400mAh battery, and a 3D-printed shell for portable wireless input applications.

[Details](https://openhardware.directory/devices/lilygo-t-keyboard) | [Markdown](https://openhardware.directory/devices/lilygo-t-keyboard/md)

## LILYGO T-Zigbee ESP32-C3 TLSR8258

Dual-MCU Zigbee development board combining ESP32-C3 (WiFi/BLE) and Telink TLSR8258 (Zigbee/BLE Mesh) — both run simultaneously for bridging Zigbee sensor networks to WiFi/cloud platforms.

[Details](https://openhardware.directory/devices/lilygo-t-zigbee-esp32-c3-tlsr8258) | [Markdown](https://openhardware.directory/devices/lilygo-t-zigbee-esp32-c3-tlsr8258/md)

## Shelly Plus 1

ESP32-C3 based WiFi/BLE smart relay module with 16A switching capacity, dry contact input, and compact DIN-rail or in-wall form factor. Flashable with Tasmota or ESPHome for local smart home control.

[Details](https://openhardware.directory/devices/shelly-plus-1) | [Markdown](https://openhardware.directory/devices/shelly-plus-1/md)

## Sonoff MINIR4 Extreme

Ultra-compact ESP32-C3 WiFi smart switch module with 10A relay, detached switch mode, and the smallest form factor in its class. Fits any wall box. Flashable with Tasmota for local control.

[Details](https://openhardware.directory/devices/sonoff-minir4-extreme) | [Markdown](https://openhardware.directory/devices/sonoff-minir4-extreme/md)

## DFRobot Beetle ESP32-C3

Coin-sized ESP32-C3 RISC-V IoT development board with WiFi, BLE 5.0, integrated LiPo charging, 13 GPIO pins, and USB-C in a 25x20.5mm form factor.

[Details](https://openhardware.directory/devices/dfrobot-beetle-esp32-c3) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-esp32-c3/md)

## Adafruit QT Py ESP32-C3

Tiny RISC-V ESP32-C3 dev board in the QT Py / Seeed XIAO footprint with 4 MB flash, WiFi, BLE 5 with Mesh, STEMMA QT, 13 GPIO, 5 ADC inputs, and USB-C — no native USB.

[Details](https://openhardware.directory/devices/adafruit-qt-py-esp32-c3) | [Markdown](https://openhardware.directory/devices/adafruit-qt-py-esp32-c3/md)