# device — Open Hardware Directory

> **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link.

**9 device listed.**

## LILYGO T-Micro32 S3

LILYGO T-Micro32 S3 is an ultra-compact ESP32-S3FH4R2 module with Wi-Fi, BLE 5.0, 4MB flash, 2MB PSRAM, and dual-core Xtensa LX7 processor in a minimal footprint.

[Details](https://openhardware.directory/devices/lilygo-t-micro32-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-micro32-s3/md)

## LILYGO T4 S3

LILYGO T4 S3 is an ESP32-S3 development board with a 2.41-inch AMOLED touchscreen (450x600), 16MB flash, 8MB PSRAM, microSD slot, Wi-Fi, and Bluetooth 5 LE.

[Details](https://openhardware.directory/devices/lilygo-t4-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t4-s3/md)

## Seeed XIAO ESP32S3 Plus

Ultra-compact ESP32-S3 development board with OV2640 camera, digital microphone, 8MB PSRAM, 8MB flash, WiFi 802.11 b/g/n, BLE 5.0, extended GPIO, and battery charging — ideal for AI and IoT edge projects.

[Details](https://openhardware.directory/devices/xiao-esp32s3-plus) | [Markdown](https://openhardware.directory/devices/xiao-esp32s3-plus/md)

## Waveshare ESP32-P4-Pico

Compact Pico-form-factor development board based on the ESP32-P4 RISC-V dual-core processor at 400MHz with 32MB PSRAM, 32MB flash, MIPI-DSI/CSI interfaces, onboard ES8311 audio codec with NS4150B amplifier, microSD slot, and USB 2.0 OTG HS.

[Details](https://openhardware.directory/devices/waveshare-esp32-p4-pico) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-p4-pico/md)

## Waveshare ESP32-P4-WIFI6

Pico-form-factor development board combining the ESP32-P4 RISC-V dual-core at 400MHz with an ESP32-C6 co-processor for WiFi 6 and Bluetooth 5 LE. Features 32MB PSRAM, 32MB flash, MIPI-DSI/CSI, onboard audio, microSD, and USB 2.0 OTG HS.

[Details](https://openhardware.directory/devices/waveshare-esp32-p4-wifi6) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-p4-wifi6/md)

## Waveshare ESP32-P4-ETH

Pico-form-factor development board with ESP32-P4 RISC-V dual-core at 400MHz, 100Mbps Ethernet via IP101 PHY, 32MB PSRAM, 32MB flash, MIPI-DSI/CSI interfaces, onboard ES8311 audio codec with amplifier, microSD, USB 2.0 OTG HS, and PoE module header.

[Details](https://openhardware.directory/devices/waveshare-esp32-p4-eth) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-p4-eth/md)

## Waveshare ESP32-P4-WIFI6-DEV-KIT

Full-featured ESP32-P4 development board with WiFi 6 and Bluetooth 5 LE via ESP32-C6, 100Mbps Ethernet, PoE header, 3.5mm headphone jack, USB OTG HS switchable host/device, 16MB flash, 32MB PSRAM, MIPI-DSI/CSI, and 28 GPIOs.

[Details](https://openhardware.directory/devices/waveshare-esp32-p4-wifi6-dev-kit) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-p4-wifi6-dev-kit/md)

## Waveshare ESP32-P4-WIFI6-POE-ETH

ESP32-P4 development board with WiFi 6 and Bluetooth 5 LE via ESP32-C6, 100Mbps PoE Ethernet via IP101GRI, IPEX external antenna, USB Type-A OTG HS, 32MB PSRAM, 16MB flash, MIPI-DSI/CSI, onboard audio, and 28 GPIOs.

[Details](https://openhardware.directory/devices/waveshare-esp32-p4-wifi6-poe-eth) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-p4-wifi6-poe-eth/md)

## Raspberry Pi Zero v1.3

Ultra-compact $10 single-board Linux computer with BCM2835 ARM at 1 GHz, 512MB RAM, micro SD, mini HDMI, two micro USB ports, and camera connector — the original Raspberry Pi Zero with camera support added in v1.3.

[Details](https://openhardware.directory/devices/raspberry-pi-zero-v1-3) | [Markdown](https://openhardware.directory/devices/raspberry-pi-zero-v1-3/md)