Touch

6 devices
Related:1-Wire125kHz RFIDADCCAN BusCAN FDDACDaikin S21DFUDisplayPort 1.4DMX512DVIDVP

ESP32-S2-WROVER Module

module
ESP32-S2-WROVER Module

Bare WiFi module with Espressif ESP32-S2 single-core Xtensa LX7 @ 240MHz, 4MB Flash, 2MB PSRAM, 802.11b/g/n, native USB 1.1 OTG, and SMD pads. Intended for integration onto custom PCBs, not a standalo

Xtensa LX7 single-core @ 240MHz (ESP32-S2)320KB SRAM + 16KB RTC SRAM + 2MB PSRAM4MB SPI FlashWiFi 802.11 b/g/n @ 2.4GHz (150 Mbps)BLE falseZigbee falseEthernet false
iotSmart Homewearable
~$6View

ESP32-S2-WROVER-I Module with uFL

module
ESP32-S2-WROVER-I Module with uFL

Bare WiFi module with ESP32-S2 Xtensa LX7 @ 240MHz, 4MB Flash, 2MB PSRAM, 802.11b/g/n, native USB OTG, and a uFL connector for an external antenna. Drop-in variant of the WROVER for improved RF range.

Xtensa LX7 single-core @ 240MHz (ESP32-S2)320KB SRAM + 16KB RTC SRAM + 2MB PSRAM4MB SPI FlashWiFi 802.11 b/g/n @ 2.4GHz (150 Mbps)BLE falseZigbee falseEthernet false
iotSmart Homewearable
~$4View

ESP32-S2 Saola 1R Dev Kit

Dev Board
ESP32-S2 Saola 1R Dev Kit

Espressif official ESP32-S2-WROVER development board with dual 20-pin headers (breadboard-friendly), 8MB Flash, 2MB PSRAM, WiFi, dual Micro-USB (native USB + UART bridge), NeoPixel RGB LED, and boot/r

Xtensa LX7 single-core @ 240MHz (ESP32-S2)320KB SRAM + 2MB PSRAM8MB SPI FlashWiFi 802.11 b/g/n @ 2.4GHz (ESP32-S2 WROVER)BLE falseZigbee falseEthernet false
iotSmart Homewearable
~$15View

ESP32-S2 Kaluga Dev Kit

Dev Board
ESP32-S2 Kaluga Dev Kit

Espressif's multimedia-focused ESP32-S2 evaluation platform bundling four extension boards: audio player, capacitive touch panel, 3.2" LCD display, and camera module. Designed to showcase ESP32-S2 hum

Xtensa LX7 single-core @ 240MHz (ESP32-S2)320KB SRAM + 2MB PSRAM4MB SPI FlashWiFi 802.11 b/g/n @ 2.4GHz (ESP32-S2 WROVER)BLE falseZigbee falseEthernet false
iotSmart HomeVoice Assistant
~$55View

FeatherS2 ESP32-S2

Dev Board
FeatherS2 ESP32-S2

Full-featured ESP32-S2 Feather-compatible board by Unexpected Maker with 16MB Flash, 8MB QSPI PSRAM, WiFi, native USB-C, 21 GPIO, STEMMA QT, APA102 RGB LED, ambient light sensor, and dual 700mA LDOs.

Xtensa LX7 single-core @ 240MHz (ESP32-S2)320KB SRAM + 8MB QSPI PSRAM16MB SPI FlashWiFi 802.11 b/g/n @ 2.4GHz (ESP32-S2)BLE falseZigbee falseEthernet false
iotSmart HomewearableEnvironmental Monitoring
~$25View

Heltec Vision Master E290

Heltec Vision Master E290

ESP32-S3 development board with 2.9-inch e-ink display and optional SX1262 LoRa radio, featuring Raspberry Pi GPIO header, Meshtastic support, and 18uA deep sleep for battery-powered IoT and mesh netw

Xtensa LX7 dual-core @ 240MHz, FPU, vector instructions, AESSHA hardware crypto512KB SRAM16KB RTC SRAM16MB (QSPI, W25Q128)WiFi 802.11 b/g/nBLE BLE 5.0
Lora Mesh NetworkingOff Grid CommunicationMeshtastic MeshElectronic Shelf Labels
~$20View

Get notified when new devices are added.

More to explore — popular traits shared by devices with Bus Interfaces: Touch.

IoTWearableSmart HomeESP32-S2 (Xtensa LX7 Single-Core 240MHz)Module802.11 b/g/n @ 2.4GHz (150 Mbps)320KB SRAM + 2MB PSRAM4MB SPI FlashDevelopment Board802.11 b/g/n @ 2.4GHz (ESP32-S2 WROVER)320KB SRAM + 16KB RTC SRAM + 2MB PSRAM