QSPI

9 devices

Browse boards with QSPI for high-speed flash memory and AMOLED display communication.

Related:1-Wire125kHz RFIDADCCAN BusCAN FDDACDaikin S21DFUDisplayPort 1.4DMX512DVIDVP

LILYGO T-Display S3 AMOLED 1.64

ESP32 S3
LILYGO T-Display S3 AMOLED 1.64

ESP32-S3 development board with a 1.64" ICNA3311 AMOLED display at 280×456 resolution, 16MB Flash, 8MB PSRAM, Wi-Fi and Bluetooth 5 LE connectivity.

ESP32-S3R816MBWiFi 802.11 b/g/n 2.4 GHzBLE BLE 5.0
wearableIot Sensor DisplaySmart Home DashboardPortable Device
~$23View

LILYGO T-Display AMOLED Lite

ESP32 S3
LILYGO T-Display AMOLED Lite

Compact ESP32-S3 development board featuring a 1.47" RM67162 AMOLED display with QSPI interface, 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and battery charging support.

ESP32-S3R816MBWiFi 802.11 b/g/n 2.4 GHzBLE BLE 5.0
wearableIot Sensor DisplaySmart Home DashboardPortable Device
~$36View

LILYGO T-Display S3 Long

ESP32 S3
LILYGO T-Display S3 Long

ESP32-S3 development board with an elongated 3.4" capacitive touch TFT LCD (180×640 resolution), 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and optional enclosure variant.

ESP32-S3R816MBWiFi 802.11 b/g/n 2.4 GHzBLE Bluetooth 5.0 + Mesh
Iot Sensor DisplaySmart Home DashboardHmi Panelprototyping
~$29View

LILYGO T-Echo Plus

Dev Board
LILYGO T-Echo Plus

Enhanced T-Echo with nRF52840, SX1262 LoRa, L76K GPS, BHI260AP IMU, 2400mAh battery, 1.54-inch e-paper display, vibration motor, buzzer, and 1/4-inch mount — Meshtastic-ready with extended runtime.

nRF52840 ARM Cortex-M4F @ 64MHz2MB2MBBLE BLE 5.0Zigbee Zigbee (nRF52840)
Lora Mesh NetworkingOff Grid CommunicationGps TrackingAsset Tracking
~$63View

LILYGO T-Encoder Pro

Dev Board
LILYGO T-Encoder Pro

ESP32-S3 smart rotary encoder knob with 1.2-inch round AMOLED display, capacitive touch, buzzer, vibration motor, and dual Qwiic connectors — ideal for smart home control and media interfaces.

ESP32-S3R8 Xtensa LX7 dual-core @ 240MHz512KB SRAM16MBWiFi 802.11 b/g/nBLE BLE 5.0
Smart KnobSmart HomeRemote ControlSmart Home Dashboard
~$31View

LILYGO T4 S3

ESP32 S3
LILYGO T4 S3

LILYGO T4 S3 is an ESP32-S3 development board with a 2.41-inch AMOLED touchscreen (450x600), 16MB flash, 8MB PSRAM, microSD slot, Wi-Fi, and Bluetooth 5 LE.

ESP32-S3R8512KB SRAM16MBWiFi 802.11 b/g/nBLE BLE 5.0
iotSmart Home DashboardSmart HomeDigital Signage
~$57View

Waveshare ESP32-S3 Touch LCD 3.49

Dev Board
Waveshare ESP32-S3 Touch LCD 3.49

ESP32-S3 dev board with 3.49" capacitive touch IPS display, dual microphone array, 6-axis IMU, RTC, and battery support. Ideal for wearable UIs and compact IoT dashboards.

ESP32-S3R8512KB SRAM16MBWiFi 2.4GHz 802.11b/g/nBLE BLE 5.0
Embedded UiSmart Home DashboardIndustrial HmiIot Dashboard
~$34View

UPduino v3.1

FPGA
UPduino v3.1

A low-cost, fully open source FPGA development board built on the Lattice ICE40UP5K with 5.3K LUTs, on-board FTDI FT232H USB programmer, 4MB qSPI flash, and 39 GPIO pins on PMOD-compatible headers.

Lattice ICE40UP5K (5.3K LUT FPGA)1Mbit SPRAM + 120Kbit DPRAM4MB39 GPIOWiFi NoBLE NoZigbee NoEthernet No
Fpga DevelopmentDigital Logic EducationRisc V Soft Coreprototyping
~$36View

Heltec Mesh Node T114

Heltec Mesh Node T114

Compact nRF52840 + SX1262 LoRa development board with BLE 5.0, optional 1.14" TFT display and L76K GPS module. Designed for Meshtastic mesh networking, LoRaWAN, and battery-powered IoT deployments wit

ARM Cortex-M4F @ 64MHz, FPU, DSP, HW crypto (CryptoCell-310)256KB SRAM1MB internal2MB external QSPIBLE BLE 5.0, Bluetooth Mesh
Meshtastic MeshLora Mesh NetworkingGps TrackingLorawan Node
~$18View

Get notified when new devices are added.

More to explore — popular traits shared by devices with Bus Interfaces: QSPI.

LoRa Mesh NetworkingWearablePrototypingSmart HomeSmart Home DashboardIoT Sensor DisplayGPS TrackingPortable DeviceESP32-S3R8 (Xtensa LX7 + 8MB PSRAM)ESP32-S3 BoardWiFi 4 (802.11 b/g/n)BLE 5.0512KB SRAM16MBDevelopment Board802.11 b/g/n 2.4 GHz