# device — Open Hardware Directory

> **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link.

**13 device listed.**

## LILYGO T-Deck Plus

ESP32-S3 handheld dev board with QWERTY keyboard, trackball, 2.8" IPS LCD, LoRa SX1262, GPS, speaker, dual microphones, and 2000mAh battery in an ABS case.

[Details](https://openhardware.directory/devices/lilygo-t-deck-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-deck-plus/md)

## LILYGO T-Watch S3

Open-source ESP32-S3 smartwatch with LoRa, 1.3" 240×240 IPS touchscreen, haptic feedback, accelerometer, speaker, microphone, IR transmitter, and 1500mAh battery. Supports Meshtastic, ESPHome, Arduino, and MicroPython.

[Details](https://openhardware.directory/devices/lilygo-t-watch-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-s3/md)

## LILYGO T-Watch 2020 V3

Programmable ESP32 smartwatch with 1.54-inch touch IPS display, BMA423 accelerometer, PCF8563 RTC, PDM microphone, speaker, IR transmitter, and vibration motor — fully open-source and Arduino/MicroPython programmable.

[Details](https://openhardware.directory/devices/lilygo-t-watch-2020-v3) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-2020-v3/md)

## LILYGO T-Embed

ESP32-S3 all-in-one media board with 1.9-inch TFT display, rotary encoder, dual microphones, 1W speaker, 7 RGB LEDs, GROVE connector, and LiPo battery support — ideal for audio players and interactive IoT devices.

[Details](https://openhardware.directory/devices/lilygo-t-embed) | [Markdown](https://openhardware.directory/devices/lilygo-t-embed/md)

## LILYGO T-Deck

ESP32-S3 handheld terminal with 2.8-inch IPS display, mini QWERTY keyboard, trackball, optional SX1262 LoRa, speaker, and microphone — a self-contained portable communicator running Meshtastic and MeshCore.

[Details](https://openhardware.directory/devices/lilygo-t-deck) | [Markdown](https://openhardware.directory/devices/lilygo-t-deck/md)

## LILYGO T-Watch Ultra

Premium ESP32-S3 smartwatch development platform with 2.06" AMOLED touchscreen, LoRa SX1262, GNSS, NFC, MAX98357A audio, DRV2605 haptic, AXP2101 PMIC, and 1100mAh battery.

[Details](https://openhardware.directory/devices/lilygo-t-watch-ultra) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-ultra/md)

## LILYGO T-Watch S3 Plus

ESP32-S3 smartwatch dev board with LoRa SX1262, GNSS, BMA423 accelerometer, MAX98357A audio, DRV2605 haptic feedback, AXP2101 PMIC, and 940mAh battery for wearable LoRa projects.

[Details](https://openhardware.directory/devices/lilygo-t-watch-s3-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-s3-plus/md)

## LILYGO T5s 2.7 inch E-Paper

LILYGO T5s is an ESP32 development board with a 2.7-inch 264×176 e-paper display, onboard I2S audio (MAX98357A amplifier + ICS43434 MEMS mic), 500mA battery management, and TF card support.

[Details](https://openhardware.directory/devices/lilygo-t5s-2-7inch-e-paper) | [Markdown](https://openhardware.directory/devices/lilygo-t5s-2-7inch-e-paper/md)

## LILYGO T-Camera Plus S3

ESP32-S3 camera development board with 8MB PSRAM, 16MB Flash, onboard microphone, MAX98357A I2S amplifier, speaker output, and choice of OV2640 or OV5640 camera sensor for audio-visual IoT applications.

[Details](https://openhardware.directory/devices/lilygo-t-camera-plus-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-camera-plus-s3/md)

## LILYGO T3-S3 MVSR

ESP32-S3 LoRa voice kit with MAX98357A speaker, MSM261S4030HOR microphone, vibration motor, RTC, 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, and SX1262/SX1276/SX1280 radio options — designed for LoRa voice communication and off-grid messaging.

[Details](https://openhardware.directory/devices/lilygo-t3-s3-mvsr) | [Markdown](https://openhardware.directory/devices/lilygo-t3-s3-mvsr/md)

## LILYGO T-Bao

Dual-MCU development board combining ESP32 and KENDRYTE K210 RISC-V AI processor with OV2640 camera, 1.54" IPS touchscreen, I2S audio amplifier, motor driver, 6-axis IMU, and Wi-Fi for edge AI and robotics prototyping.

[Details](https://openhardware.directory/devices/lilygo-t-bao) | [Markdown](https://openhardware.directory/devices/lilygo-t-bao/md)

## DFRobot ESP32-S3 AI Camera

ESP32-S3 AI camera module with 2MP wide-angle night vision sensor, I2S speaker and microphone, ambient light sensor, WiFi/BLE 5.0, and edge AI inference support in a 42x42mm package.

[Details](https://openhardware.directory/devices/dfrobot-esp32-s3-ai-camera) | [Markdown](https://openhardware.directory/devices/dfrobot-esp32-s3-ai-camera/md)

## Adafruit My Little Hacker ESP32-S2

Child-oriented ESP32-S2 dev board with 4MB flash, 2MB PSRAM, 5 NeoPixels, microSD, I2S audio amplifier for speakers, USB-C, STEMMA QT, and AA battery or USB-C power support.

[Details](https://openhardware.directory/devices/adafruit-my-little-hacker-esp32-s2) | [Markdown](https://openhardware.directory/devices/adafruit-my-little-hacker-esp32-s2/md)