# device — Open Hardware Directory

> **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link.

**5 device listed.**

## LILYGO T-RS S3

ESP32-S3 industrial communication board with isolated RS-232 and RS-485 modules (3000V isolation), 7–24V DC input via DB9 connector, Wi-Fi, and Bluetooth 5 LE for Modbus and industrial serial networking applications.

[Details](https://openhardware.directory/devices/lilygo-t-rs-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-rs-s3/md)

## Heltec HRI-485X

Industrial RS-485 wireless converter with ESP32, LoRa SX1262, Ethernet, and ESPHome support. Converts RS-485/Modbus serial data to LoRa, LoRaWAN, LTE, or Ethernet for long-range industrial IoT communication. DIN rail mountable with IP65 protection and 4.5-28V wide voltage input.

[Details](https://openhardware.directory/devices/heltec-hri-485x) | [Markdown](https://openhardware.directory/devices/heltec-hri-485x/md)

## Arduino Opta WiFi

Industrial micro PLC with STM32H747 dual-core Cortex-M7/M4, WiFi, BLE, Ethernet, 4\u00d72.3kW relays, Modbus TCP/RTU, hardware security, DIN rail mount, and IEC 61131-3 PLC programming — co-developed with Finder for real industrial automation.

[Details](https://openhardware.directory/devices/arduino-opta-wifi) | [Markdown](https://openhardware.directory/devices/arduino-opta-wifi/md)

## CompuLab IOT-DIN-IMX8PLUS

DIN-rail industrial IoT gateway with NXP i.MX8M Plus quad-core Cortex-A53 at 1.8GHz, up to 8GB RAM, dual LAN, CAN bus, RS485/RS232, optional LTE, stackable I/O modules (up to 12x serial, 32x DI/DO, ADC), and 15-year availability.

[Details](https://openhardware.directory/devices/compulab-iot-din-imx8plus) | [Markdown](https://openhardware.directory/devices/compulab-iot-din-imx8plus/md)

## BigTreeTech Rodent V1.0

ESP32-based CNC controller board co-developed with RatRig, featuring 4x TMC2160 drivers (up to 56V/4.7A RMS), FluidNC firmware, WiFi, RS-485, CAN, USB-C, and OLED display support for engraving machines.

[Details](https://openhardware.directory/devices/bigtreetech-rodent-v1-0) | [Markdown](https://openhardware.directory/devices/bigtreetech-rodent-v1-0/md)