# device — Open Hardware Directory

> **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link.

**5 device listed.**

## Adafruit QT Py RP2040

Tiny RP2040-based dev board in the QT Py / Seeed XIAO form factor, featuring 8MB flash, USB-C, a NeoPixel, and a STEMMA QT connector for solderless I2C sensor wiring.

[Details](https://openhardware.directory/devices/adafruit-qt-py-rp2040) | [Markdown](https://openhardware.directory/devices/adafruit-qt-py-rp2040/md)

## Pine64 PineCone BL602

Open-source RISC-V evaluation board powered by the Bouffalo Lab BL602 WiFi+BLE5 SoC. Features 276KB SRAM, 2MB flash, USB-C with CH340 serial bridge, onboard RGB LED, JTAG header, and PCB antenna. Supports Arduino, NuttX, FreeRTOS, Rust, and OpenBeken firmware. Priced from $3.99.

[Details](https://openhardware.directory/devices/pine64-pinecone-bl602) | [Markdown](https://openhardware.directory/devices/pine64-pinecone-bl602/md)

## Pine64 PineNut Model-01S

Ultra-compact BL602 RISC-V WiFi+BLE5 IoT module in ESP-01S form factor with 8-pin through-hole header. Features 276KB SRAM, 2MB flash, onboard RGB LED, and PCB antenna. Supports Arduino, NuttX, FreeRTOS, and OpenBeken firmware. Priced from $1.99.

[Details](https://openhardware.directory/devices/pine64-pinenut-01s) | [Markdown](https://openhardware.directory/devices/pine64-pinenut-01s/md)

## Pine64 PineNut Model-12S

BL602 RISC-V WiFi+BLE5 stamp module with 16 castellated pads for SMT integration. Exposes 11 GPIOs with SPI, I2C, UART, SDIO, JTAG, ADC, and DAC. Features 276KB SRAM, 2MB flash, and PCB antenna. Priced from $1.99.

[Details](https://openhardware.directory/devices/pine64-pinenut-12s) | [Markdown](https://openhardware.directory/devices/pine64-pinenut-12s/md)

## Pine64 Ox64

Pico-sized RISC-V SBC powered by the Bouffalo Lab BL808 triple-core SoC with WiFi, BLE 5.0, and Zigbee. Features 64MB PSRAM, up to 16MB flash, microSD slot, USB-C with MIPI-CSI camera support, and 26 GPIO pins. Runs Linux, NuttX, and FreeRTOS. Priced from $6.

[Details](https://openhardware.directory/devices/pine64-ox64) | [Markdown](https://openhardware.directory/devices/pine64-ox64/md)