Ethernet Controller

6 devices

Products with dedicated Ethernet controller ICs for wired networking, including 10/100, Gigabit, and 2.5G controllers.

Related:1.54" E-Paper Display128MB SLC NAND Flash Memory128Mbit Serial NOR Flash16-Channel I2C GPIO Expander1N41482.41" AMOLED Display2.9" B/W E-Paper Display (128x296)3.3V 2A DC-DC Buck Converter3.3V 800mA LDO Regulator3W Mono Class-D Audio Amplifier4G LTE Cat-4 Global Cellular Modem5-Way Navigation Button

TimeHAT I226 NIC with PPS In/Out for RPi5

Raspberry Pi Hat
TimeHAT I226 NIC with PPS In/Out for RPi5

Open-source Raspberry Pi 5 PCIe HAT with Intel I226 2.5G Ethernet NIC, dual SMA connectors for 1PPS input/output, built-in TCXO, and M.2 slot for GNSS modules. Ideal for PTP grandmaster clocks.

None (HAT expansion board — uses host Raspberry Pi 5 BCM2712 processor)N/A (expansion board)N/A (expansion board)WiFi falseBLE falseZigbee falseEthernet 2.5 Gbps (Intel I226)
Precision TimingPtp GrandmasterGnss Time ServerNetwork Time Synchronization
~$200View

DFRobot W5500 Ethernet PoE Board

Dev Board
DFRobot W5500 Ethernet PoE Board

Arduino Leonardo-compatible IoT board with WIZnet W5500 hardwired TCP/IP Ethernet (10/100Mbps), 802.3af PoE power input, ATmega32u4 MCU, 20 digital I/O pins, and 6 analog inputs for wired IoT applicat

ATmega32u4 @ 16MHz, single-core AVR2KB SRAM32KB (4KB bootloader)Ethernet 10/100 Mbps (W5500)
Poe Iot NodeWired Iot GatewayIndustrial AutomationBuilding Automation
~$45View

DFRobot Xboard Relay

Dev Board
DFRobot Xboard Relay

Ethernet-controlled dual-relay board with ATmega32u4, WIZnet W5100 Ethernet, XBee socket, and two 10A relays for remote switching of AC/DC loads via web or MQTT, ideal for home automation.

ATmega32u4 @ 16MHz, single-core AVR2.5KB SRAM32KB (4KB bootloader)Ethernet 10/100 Mbps (W5100)
Smart SwitchHome AutomationBuilding Automation
~$35View

FriendlyElec NanoPC-T6 LTS

FriendlyElec NanoPC-T6 LTS

Rockchip RK3588 SBC with dual 2.5GbE, dual HDMI output + HDMI input, M.2 NVMe, and a 40-pin GPIO header — the long-term-support variant of FriendlyElec's flagship single-board computer.

ARM Cortex-A76 ×4 @ 2.4GHz + Cortex-A55 ×4 @ 1.8GHz4GB / 8GB / 16GB LPDDR4X32GB / 64GB eMMC (HS400) + 32MB SPI NOREthernet 2× 2.5 Gbps (RTL8125BG, PCIe)
Home ServerEdge ComputingEdge AiHome Lab Networking
~$147View

Netduino Plus

Dev Board
Netduino Plus

The Netduino Plus is an open-source .NET Micro Framework microcontroller board with built-in Ethernet, Arduino-compatible pinout, and microSD slot — enabling C# development for connected embedded proj

32-bit ARM Cortex-M3 (.NET Micro Framework)60 KB128 KBEthernet 10/100 Mbps
iotIndustrial Automation
~$60View

Raspberry Pi 1 Model B

Dev Board
Raspberry Pi 1 Model B

The Raspberry Pi 1 Model B is the original production Raspberry Pi single-board computer, featuring a Broadcom BCM2835 ARM1176JZF-S at 700MHz, 512MB RAM, 100Mbps Ethernet, 2 USB 2.0 ports, HDMI, 26-pi

BCM2835 ARM1176JZF-S @ 700MHz512 MB SDRAMnone (boots from SD card)Ethernet 100Mbps (LAN9512, via USB hub chip)
iotIot GatewayMedia PlayerEnvironmental Monitoring
~$35View

Get notified when new devices are added.

More to explore — popular traits shared by devices with Components: Ethernet Controller.

IoTIndustrial AutomationBuilding AutomationATmega32u4 @ 16MHz, single-core AVRDevelopment Board32KB (4KB bootloader)