Filter by USB type
199 categories · 781 devices total
USB Type-C is a reversible connector standard for power delivery, data transfer, and firmware flashing.
Micro-USB port for power input and serial programming.
USB Type-C 2.0 port for power delivery, serial programming, and data transfer.
USB Type-A connector for connecting to a host computer or acting as USB host.
USB-C port with USB On-The-Go support for acting as both host and device.
USB-C port with native USB OTG support for both host and device operation.
Micro-USB port with Silicon Labs CP2102 USB-to-UART bridge for serial programming and debugging.
USB-C port with WCH CH9102 USB-to-UART bridge for high-speed serial programming.
USB Type-C connector with Silicon Labs CP2102 USB-to-UART bridge for programming and serial communication.
USB-C port using the MCU's native USB CDC for serial communication without a bridge chip.
Micro USB with CH9102F USB-to-serial bridge, driver-free on modern OS versions.
Two USB-C ports for simultaneous programming and power delivery.
Two USB Type-C 2.0 ports for host and target device connections.
Micro-USB port using CH9102 USB-to-serial bridge for programming.
Micro-USB programming available via the optional T-U2T USB-to-serial adapter.
Micro-USB port using CH340C USB-to-serial bridge for programming.
Micro-USB port with DFU (Device Firmware Upgrade) support for programming and serial communication.
No onboard USB port; programming via JTAG, UART pins, or wireless.
No USB port; requires the separate T-U2T USB-to-serial adapter for programming.
No onboard USB port. Programming and serial communication require an external USB-to-UART bridge adapter connected to the module's UART pins.
USB programming port using CH9102 USB-to-UART bridge driver.
Standard USB Type-B connector, commonly used on test equipment and printers.
USB Type-C port with CH340K USB-to-serial bridge for programming.
USB programming possible with the optional T-U2T USB-to-serial adapter.
USB-A 2.0 port for connecting peripherals or acting as USB host.
USB-C port with USB 3.0 SuperSpeed data transfer capability.
USB Type-C port used exclusively for power input/output, without data transfer capability.
USB Type-C connector used exclusively for power delivery (5V), without data transfer or programming capability over the same port.
USB Type-C port connected through a CP2102 USB-to-UART bridge chip for serial programming and debugging.
USB-C port supporting USB 2.0 with native OTG via the ESP32-S3's built-in USB peripheral, plus a CP2102 USB-to-UART bridge for standard serial programming.