# device — Open Hardware Directory > **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link. **33 device listed.** ## LILYGO T-Echo nRF52840 + SX1262 LoRa + L76K GPS all-in-one board with 1.54-inch e-paper display, 850mAh battery, Thread, Zigbee, and BLE 5.0 — runs Meshtastic, SoftRF, and custom NRF firmware out of the box. [Details](https://openhardware.directory/devices/lilygo-t-echo) | [Markdown](https://openhardware.directory/devices/lilygo-t-echo/md) ## LILYGO T-QT C6 Tiny ESP32-C6 dev board with WiFi 6, BLE 5, Zigbee/Thread (802.15.4), 0.85" 128×128 touchscreen, LiPo battery charging, and breathing LED in a thumbnail-sized form factor. [Details](https://openhardware.directory/devices/lilygo-t-qt-c6) | [Markdown](https://openhardware.directory/devices/lilygo-t-qt-c6/md) ## LILYGO T-Knob Smart rotary encoder controller based on ESP32-C6 with WiFi 6, BLE 5, Zigbee/Thread, 4 RGB LEDs, buzzer, and magnetic Hall-effect knob for wireless volume control and smart home automation. [Details](https://openhardware.directory/devices/lilygo-t-knob) | [Markdown](https://openhardware.directory/devices/lilygo-t-knob/md) ## LILYGO T-Panel S3 Dual-MCU smart panel (ESP32-S3 + ESP32-H2) with 4" 480×480 IPS LCD (ST7701S), WiFi, BLE, native Zigbee/Thread/Matter via H2 co-processor, and optional RS485/CAN FD expansion for wall-mounted smart home controllers. [Details](https://openhardware.directory/devices/lilygo-t-panel-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-panel-s3/md) ## LILYGO T7-C6 Compact ESP32-C6 development board with WiFi 6, BLE 5, and IEEE 802.15.4 (Zigbee/Thread/Matter) support, featuring 4MB flash and USB-C for next-generation IoT protocols. [Details](https://openhardware.directory/devices/lilygo-t7-c6) | [Markdown](https://openhardware.directory/devices/lilygo-t7-c6/md) ## LILYGO T-Echo Plus Enhanced T-Echo with nRF52840, SX1262 LoRa, L76K GPS, BHI260AP IMU, 2400mAh battery, 1.54-inch e-paper display, vibration motor, buzzer, and 1/4-inch mount — Meshtastic-ready with extended runtime. [Details](https://openhardware.directory/devices/lilygo-t-echo-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-echo-plus/md) ## LILYGO T-Echo Lite Simplified T-Echo with nRF52840, SX1262 LoRa, and optional L76K GPS — a low-cost, low-power LoRa node and Meshtastic-compatible board for off-grid mesh networking. [Details](https://openhardware.directory/devices/lilygo-t-echo-lite) | [Markdown](https://openhardware.directory/devices/lilygo-t-echo-lite/md) ## LILYGO T-Zigbee ESP32-C3 TLSR8258 Dual-MCU Zigbee development board combining ESP32-C3 (WiFi/BLE) and Telink TLSR8258 (Zigbee/BLE Mesh) — both run simultaneously for bridging Zigbee sensor networks to WiFi/cloud platforms. [Details](https://openhardware.directory/devices/lilygo-t-zigbee-esp32-c3-tlsr8258) | [Markdown](https://openhardware.directory/devices/lilygo-t-zigbee-esp32-c3-tlsr8258/md) ## M5Stack NanoC6 Ultra-compact ESP32-C6 dev board by M5Stack with WiFi 6, BLE 5.0, Zigbee 3.0, and Thread/Matter support. RISC-V single-core at 160MHz, USB-C, RGB LED, and button in a tiny form factor. [Details](https://openhardware.directory/devices/m5stack-nanoc6) | [Markdown](https://openhardware.directory/devices/m5stack-nanoc6/md) ## Seeed XIAO 2-Channel WiFi AC Relay ESP32-C6 based 2-channel AC relay module with WiFi 6, Zigbee 3.0, and Thread support. Compact relay board compatible with Arduino and ESPHome for smart home AC switching up to 10A per channel. [Details](https://openhardware.directory/devices/seeed-xiao-2-channel-wifi-ac-relay) | [Markdown](https://openhardware.directory/devices/seeed-xiao-2-channel-wifi-ac-relay/md) ## DFRobot FireBeetle 2 ESP32-C5 Development Kit ESP32-C5 RISC-V development kit with dual-band WiFi 6 (2.4/5GHz), BLE 5, Zigbee 3.0, Thread 1.3, and Matter support. Features solar charging, 21uA deep sleep, IO expansion board, and 18 digital I/O pins at just $8.90. [Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-c5) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-c5/md) ## makerdiary nRF52840-MDK USB Dongle Open-source multi-protocol wireless USB dongle based on the Nordic nRF52840 SoC. Supports BLE 5.4, Thread, Zigbee, 802.15.4, NFC, and USB 2.0 with UF2 drag-and-drop bootloader. Priced at $12.99. [Details](https://openhardware.directory/devices/makerdiary-nrf52840-mdk-usb-dongle) | [Markdown](https://openhardware.directory/devices/makerdiary-nrf52840-mdk-usb-dongle/md) ## Waveshare ESP32-C6-GEEK Compact USB-A dongle development board with ESP32-C6 RISC-V MCU, 1.14\" IPS LCD, WiFi 6, BLE 5.0, Zigbee 3.0, Thread, and microSD slot for portable IoT projects. [Details](https://openhardware.directory/devices/waveshare-esp32-c6-geek) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-c6-geek/md) ## Waveshare ESP32-H2-Zero Ultra-compact castellated ESP32-H2 development board with BLE 5.2, Zigbee 3.0, Thread 1.3, and Matter support. USB-C powered with WS2812 RGB LED, 15 GPIO pins, and 4MB flash in a tiny 23.5 x 15.2mm form factor. [Details](https://openhardware.directory/devices/waveshare-esp32-h2-zero) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-h2-zero/md) ## Arduino Nano Matter Ultra-compact Matter/Thread/BLE development board based on Silicon Labs MGM240S, bringing official Matter support to the beloved Arduino Nano form factor at 45×18mm. [Details](https://openhardware.directory/devices/arduino-nano-matter) | [Markdown](https://openhardware.directory/devices/arduino-nano-matter/md) ## Olimex ESP32-C6-EVB Open-source hardware evaluation board with ESP32-C6, 4 mains-rated relays, 4 opto-isolated inputs, and WiFi 6/Thread/Zigbee/Matter connectivity for home and industrial automation. [Details](https://openhardware.directory/devices/olimex-esp32-c6-evb) | [Markdown](https://openhardware.directory/devices/olimex-esp32-c6-evb/md) ## SparkFun Thing Plus Matter - MGM240P Feather-compatible Matter/Thread/Zigbee/BLE dev board based on Silicon Labs MGM240P with Qwiic, LiPo charging, microSD, and +20dBm radio range. [Details](https://openhardware.directory/devices/sparkfun-thing-plus-matter-mgm240p) | [Markdown](https://openhardware.directory/devices/sparkfun-thing-plus-matter-mgm240p/md) ## Olimex ESP32-C6-DevKit-Lipo Breadboard-friendly open-source ESP32-C6 dev board with WiFi 6, Thread, Zigbee, BLE 5, built-in LiPo charger, and dual USB-C — all for under €9. [Details](https://openhardware.directory/devices/olimex-esp32-c6-devkit-lipo) | [Markdown](https://openhardware.directory/devices/olimex-esp32-c6-devkit-lipo/md) ## Olimex ESP32-H2-DevKit-LiPo Ultra-affordable open-source ESP32-H2 dev board for Thread, Zigbee, and Matter — BLE 5, LiPo charging, Qwiic/Stemma, dual USB-C, for €5.95. [Details](https://openhardware.directory/devices/olimex-esp32-h2-devkit-lipo) | [Markdown](https://openhardware.directory/devices/olimex-esp32-h2-devkit-lipo/md) ## DFRobot FireBeetle 2 ESP32-C6 Low-cost ESP32-C6 IoT board with WiFi 6, BLE 5, Thread, Zigbee, Matter, solar panel charging with MPPT, and ultra-low 16µA deep sleep — for $5.90. [Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-c6) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-c6/md) ## DFRobot Beetle ESP32-C6 Coin-sized (25×20.5mm) ESP32-C6 wearable dev board with WiFi 6, BLE 5, Thread, Zigbee, Matter, integrated LiPo charger, and 14µA deep sleep — for $4.90. [Details](https://openhardware.directory/devices/dfrobot-beetle-esp32-c6) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-esp32-c6/md) ## Seeed Studio XIAO ESP32C6 Thumb-sized (21×17.8mm) Matter/Thread/Zigbee/WiFi 6/BLE 5.3 dev board with dual RISC-V cores, onboard antenna, 15µA deep sleep, and hardware security — for ~$5. [Details](https://openhardware.directory/devices/seeed-xiao-esp32c6) | [Markdown](https://openhardware.directory/devices/seeed-xiao-esp32c6/md) ## Adafruit ESP32-C6 Feather Open-source Feather-form-factor ESP32-C6 board with WiFi 6, BLE 5, Thread, Zigbee, STEMMA QT, NeoPixel, LiPo charging with MAX17048, and CircuitPython support — $14.95. [Details](https://openhardware.directory/devices/adafruit-esp32-c6-feather) | [Markdown](https://openhardware.directory/devices/adafruit-esp32-c6-feather/md) ## M5Stack NanoH2 Ultra-compact ESP32-H2 dev module with Thread 1.4, Zigbee 3.0, Matter, and BLE 5 — featuring a Grove port, IR transmitter, and RGB LED in a stamp-sized 23.5×12mm form factor. [Details](https://openhardware.directory/devices/m5stack-nanoh2) | [Markdown](https://openhardware.directory/devices/m5stack-nanoh2/md) ## Espressif ESP Thread Border Router Official Espressif dual-SoC development board combining ESP32-S3 (host) and ESP32-H2 (radio co-processor) to build Thread 1.3 border routers and Zigbee gateways with Matter support over WiFi. [Details](https://openhardware.directory/devices/espressif-esp-thread-border-router) | [Markdown](https://openhardware.directory/devices/espressif-esp-thread-border-router/md) ## Espressif ESP32-C6-DevKitC-1 Official Espressif development board for the ESP32-C6, combining WiFi 6, BLE 5, and IEEE 802.15.4 (Thread/Zigbee/Matter) on a RISC-V single-core SoC — ideal for Matter-native IoT and smart home development. [Details](https://openhardware.directory/devices/espressif-esp32-c6-devkitc-1) | [Markdown](https://openhardware.directory/devices/espressif-esp32-c6-devkitc-1/md) ## ESP32-C6-WROOM-1-N4 Module Espressif ESP32-C6 WROOM module with 4MB flash and PCB antenna, supporting Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread — for soldering onto custom IoT hardware. [Details](https://openhardware.directory/devices/esp32-c6-wroom-1-n4) | [Markdown](https://openhardware.directory/devices/esp32-c6-wroom-1-n4/md) ## ESP32-C6-WROOM-1-N8 Module Espressif ESP32-C6 WROOM module with 8MB flash and PCB antenna, supporting Wi-Fi 6 (802.11ax), Bluetooth 5 LE, Zigbee 3.0, and Thread — for soldering onto custom IoT hardware. [Details](https://openhardware.directory/devices/esp32-c6-wroom-1-n8) | [Markdown](https://openhardware.directory/devices/esp32-c6-wroom-1-n8/md) ## ESP32-C6-DevKitC-1-N8 Espressif reference development board for the ESP32-C6 with 8MB flash, Wi-Fi 6, Bluetooth 5 LE, Zigbee 3.0, Thread, RGB LED, dual USB-C ports, and full GPIO breakout. [Details](https://openhardware.directory/devices/esp32-c6-devkitc-1-n8) | [Markdown](https://openhardware.directory/devices/esp32-c6-devkitc-1-n8/md) ## ESP32-H2-DevKitM-1-N4S Espressif development board for the ESP32-H2 with Bluetooth 5 LE, Zigbee 3.0, Thread, and Matter support, 4MB flash, USB-C, RGB LED, and full GPIO breakout — no Wi-Fi. [Details](https://openhardware.directory/devices/esp32-h2-devkitm-1-n4s) | [Markdown](https://openhardware.directory/devices/esp32-h2-devkitm-1-n4s/md) ## ESP32-H2-MINI-1 Module Espressif ESP32-H2 MINI module with 4MB flash and PCB antenna, supporting Bluetooth 5 LE, Zigbee 3.0, Thread, and Matter — a compact bare module for custom PCB designs without Wi-Fi. [Details](https://openhardware.directory/devices/esp32-h2-mini-1) | [Markdown](https://openhardware.directory/devices/esp32-h2-mini-1/md) ## ESP32-C6 DevKitC-1-N8 Official Espressif development board featuring the ESP32-C6 — a RISC-V single-core MCU with WiFi 6, BLE 5.0, Zigbee 3.0, Thread 1.3, and native Matter support. 8MB flash, USB-C JTAG/serial. [Details](https://openhardware.directory/devices/esp32-c6-devkitc-1) | [Markdown](https://openhardware.directory/devices/esp32-c6-devkitc-1/md) ## ESP32-H2 DevKitM-1-N4S Official Espressif development board for the ESP32-H2 — a RISC-V MCU purpose-built for 802.15.4 wireless protocols: BLE 5.3, Zigbee 3.0, Thread 1.3, and Matter. No WiFi. 4MB flash, USB-C with CH343P. [Details](https://openhardware.directory/devices/esp32-h2-devkitm-1) | [Markdown](https://openhardware.directory/devices/esp32-h2-devkitm-1/md)