# device — Open Hardware Directory > **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link. **80 device listed.** ## LILYGO T-Deck Plus ESP32-S3 handheld dev board with QWERTY keyboard, trackball, 2.8" IPS LCD, LoRa SX1262, GPS, speaker, dual microphones, and 2000mAh battery in an ABS case. [Details](https://openhardware.directory/devices/lilygo-t-deck-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-deck-plus/md) ## LILYGO T5 E-Paper S3 Pro Lite A pocket-sized ESP32-S3 development board with a 4.7-inch capacitive touchscreen e-paper display (960×540, 16 grayscale), anti-glare glass, warm-toned backlight, MagSafe wireless charging, and comprehensive battery management. [Details](https://openhardware.directory/devices/lilygo-t5-e-paper-s3-pro-lite) | [Markdown](https://openhardware.directory/devices/lilygo-t5-e-paper-s3-pro-lite/md) ## LILYGO T-Watch S3 Open-source ESP32-S3 smartwatch with LoRa, 1.3" 240×240 IPS touchscreen, haptic feedback, accelerometer, speaker, microphone, IR transmitter, and 1500mAh battery. Supports Meshtastic, ESPHome, Arduino, and MicroPython. [Details](https://openhardware.directory/devices/lilygo-t-watch-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-s3/md) ## LILYGO T-Display Compact ESP32-PICO-D4 development board with integrated 1.14-inch ST7789V IPS LCD (135×240, 260 PPI), WiFi, Bluetooth 4.2/BLE, and Arduino/MicroPython support. [Details](https://openhardware.directory/devices/lilygo-t-display) | [Markdown](https://openhardware.directory/devices/lilygo-t-display/md) ## LILYGO T-Display S3 ESP32-S3 development board with 1.9-inch ST7789V TFT display (170×320), optional capacitive touch, 16MB flash, 8MB PSRAM, and USB-C. Popular for smart displays and IoT dashboards. [Details](https://openhardware.directory/devices/lilygo-t-display-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3/md) ## LILYGO T-Watch 2020 V3 Programmable ESP32 smartwatch with 1.54-inch touch IPS display, BMA423 accelerometer, PCF8563 RTC, PDM microphone, speaker, IR transmitter, and vibration motor — fully open-source and Arduino/MicroPython programmable. [Details](https://openhardware.directory/devices/lilygo-t-watch-2020-v3) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-2020-v3/md) ## LILYGO T-QT Pro Ultra-compact ESP32-S3 board with a 0.85-inch GC9107 IPS display (128×128), 2MB PSRAM, WiFi, BLE 5.0, and USB-C — one of the smallest ESP32-S3 development boards available. [Details](https://openhardware.directory/devices/lilygo-t-qt-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-qt-pro/md) ## LILYGO T-Display S3 AMOLED ESP32-S3 board with 1.91-inch RM67162 AMOLED display (240×536), optional touch, 16MB flash, 8MB PSRAM, and USB-C — delivering vivid OLED visuals for IoT dashboards and smart displays. [Details](https://openhardware.directory/devices/lilygo-t-display-s3-amoled) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3-amoled/md) ## LILYGO T-Call SIM800 ESP32 board with SIM800L 2G GSM/GPRS modem for SMS alerts, voice calls, and cellular data — ideal for remote monitoring and IoT projects needing cellular fallback on a budget. [Details](https://openhardware.directory/devices/lilygo-t-call-sim800) | [Markdown](https://openhardware.directory/devices/lilygo-t-call-sim800/md) ## LILYGO T-Embed ESP32-S3 all-in-one media board with 1.9-inch TFT display, rotary encoder, dual microphones, 1W speaker, 7 RGB LEDs, GROVE connector, and LiPo battery support — ideal for audio players and interactive IoT devices. [Details](https://openhardware.directory/devices/lilygo-t-embed) | [Markdown](https://openhardware.directory/devices/lilygo-t-embed/md) ## LILYGO T-RGB ESP32-S3 board with a circular 2.1\" or 2.8\" ST7701S RGB display (480×480) and capacitive touch — perfect for smart home controllers, round-display clocks, and interactive dashboards. [Details](https://openhardware.directory/devices/lilygo-t-rgb) | [Markdown](https://openhardware.directory/devices/lilygo-t-rgb/md) ## LILYGO T-Echo nRF52840 + SX1262 LoRa + L76K GPS all-in-one board with 1.54-inch e-paper display, 850mAh battery, Thread, Zigbee, and BLE 5.0 — runs Meshtastic, SoftRF, and custom NRF firmware out of the box. [Details](https://openhardware.directory/devices/lilygo-t-echo) | [Markdown](https://openhardware.directory/devices/lilygo-t-echo/md) ## LILYGO T-Deck ESP32-S3 handheld terminal with 2.8-inch IPS display, mini QWERTY keyboard, trackball, optional SX1262 LoRa, speaker, and microphone — a self-contained portable communicator running Meshtastic and MeshCore. [Details](https://openhardware.directory/devices/lilygo-t-deck) | [Markdown](https://openhardware.directory/devices/lilygo-t-deck/md) ## LILYGO T-HMI ESP32-S3 HMI development board with a 2.8-inch resistive touchscreen, GROVE connectors, 16MB flash, 8MB PSRAM, and USB-C — designed for industrial HMI panels and interactive control interfaces. [Details](https://openhardware.directory/devices/lilygo-t-hmi) | [Markdown](https://openhardware.directory/devices/lilygo-t-hmi/md) ## LILYGO T-Watch Ultra Premium ESP32-S3 smartwatch development platform with 2.06" AMOLED touchscreen, LoRa SX1262, GNSS, NFC, MAX98357A audio, DRV2605 haptic, AXP2101 PMIC, and 1100mAh battery. [Details](https://openhardware.directory/devices/lilygo-t-watch-ultra) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-ultra/md) ## LILYGO T-Glass Wearable ESP32-S3 development board with 1.1" full-color AMOLED display in a glasses prism form factor, microphone, RTC, and touch button for head-up display applications. [Details](https://openhardware.directory/devices/lilygo-t-glass) | [Markdown](https://openhardware.directory/devices/lilygo-t-glass/md) ## LILYGO T-Display S3 Pro Upgraded T-Display S3 with a larger 2.33" IPS touchscreen, ESP32-S3R8, OTG charging via SY6970, QWIIC ports, ambient light/proximity sensor, and optional camera module expansion via POGOpin. [Details](https://openhardware.directory/devices/lilygo-t-display-s3-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3-pro/md) ## LILYGO T-Lora Pager Compact LoRa pager with ESP32-S3, 2.33" touchscreen, QWERTY keyboard, u-blox GNSS, BHI260AP AI IMU, ES8311 audio codec, RFID/NFC, and foldable antenna for off-grid messaging. [Details](https://openhardware.directory/devices/lilygo-t-lora-pager) | [Markdown](https://openhardware.directory/devices/lilygo-t-lora-pager/md) ## LILYGO T-Watch S3 Plus ESP32-S3 smartwatch dev board with LoRa SX1262, GNSS, BMA423 accelerometer, MAX98357A audio, DRV2605 haptic feedback, AXP2101 PMIC, and 940mAh battery for wearable LoRa projects. [Details](https://openhardware.directory/devices/lilygo-t-watch-s3-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-s3-plus/md) ## LILYGO T-Deck Pro ESP32-S3 keyboard terminal with 3.1" e-paper touchscreen, LoRa SX1262, GPS, BHI260AP AI IMU, PCM5102A/ES8311 audio, 1400mAh battery, and optional 4G LTE (A7682E) for off-grid terminal applications. [Details](https://openhardware.directory/devices/lilygo-t-deck-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-deck-pro/md) ## LILYGO T-QT C6 Tiny ESP32-C6 dev board with WiFi 6, BLE 5, Zigbee/Thread (802.15.4), 0.85" 128×128 touchscreen, LiPo battery charging, and breathing LED in a thumbnail-sized form factor. [Details](https://openhardware.directory/devices/lilygo-t-qt-c6) | [Markdown](https://openhardware.directory/devices/lilygo-t-qt-c6/md) ## LILYGO T-SIM7080G S3 ESP32-S3 development board with SIM7080G NB-IoT/LTE-M/GNSS module, 16MB flash, 8MB PSRAM, 18650 battery support, and USB-C connectivity for low-power IoT applications. [Details](https://openhardware.directory/devices/lilygo-t-sim7080g-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim7080g-s3/md) ## LILYGO T-Embed SI4732 ESP32-S3 board with SI4732-A10 AM/FM/SW/LW radio receiver, 1.9" IPS display, 900mAh battery, and rotary encoder for a portable software-defined radio experience. [Details](https://openhardware.directory/devices/lilygo-t-embed-si4732) | [Markdown](https://openhardware.directory/devices/lilygo-t-embed-si4732/md) ## LILYGO T-Display AMOLED Lite Compact ESP32-S3 development board featuring a 1.47" RM67162 AMOLED display with QSPI interface, 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and battery charging support. [Details](https://openhardware.directory/devices/lilygo-t-display-amoled-lite) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-amoled-lite/md) ## LILYGO T-Display S3 AMOLED 1.64 ESP32-S3 development board with a 1.64" ICNA3311 AMOLED display at 280×456 resolution, 16MB Flash, 8MB PSRAM, Wi-Fi and Bluetooth 5 LE connectivity. [Details](https://openhardware.directory/devices/lilygo-t-display-s3-amoled-1-64) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3-amoled-1-64/md) ## LILYGO T-Display S3 AMOLED Plus Enhanced ESP32-S3 AMOLED development board with 1.91" RM67162 display, onboard RTC, PMU, SD card slot, capacitive touch, metal shielding, and external FPC antenna. [Details](https://openhardware.directory/devices/lilygo-t-display-s3-amoled-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3-amoled-plus/md) ## LILYGO T-SIM7070G ESP32-WROVER-E development board with SIM7070G NB-IoT/LTE-M/GPRS modem, GPS, Wi-Fi, Bluetooth 4.2, MicroSD, and solar charging input for ultra-low-power IoT applications. [Details](https://openhardware.directory/devices/lilygo-t-sim7070g) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim7070g/md) ## LILYGO T-Display Keyboard Compact ESP32 development board combining a physical keyboard with a 1.14" IPS display, USB-C charging, multiple interfaces, and optional 2800mAh battery in shell configuration. [Details](https://openhardware.directory/devices/lilygo-t-display-keyboard) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-keyboard/md) ## LILYGO T-Display S3 Long ESP32-S3 development board with an elongated 3.4" capacitive touch TFT LCD (180×640 resolution), 16MB Flash, 8MB PSRAM, Wi-Fi, Bluetooth 5, and optional enclosure variant. [Details](https://openhardware.directory/devices/lilygo-t-display-s3-long) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3-long/md) ## LILYGO T-SIM7600E ESP32-based development board with SIM7600E-H 4G LTE Cat-4 modem, GPS, Wi-Fi, Bluetooth, 18650 battery holder with solar charging, and dual USB-C ports for high-speed IoT connectivity. [Details](https://openhardware.directory/devices/lilygo-t-sim7600e) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim7600e/md) ## LILYGO T-Echo Plus Enhanced T-Echo with nRF52840, SX1262 LoRa, L76K GPS, BHI260AP IMU, 2400mAh battery, 1.54-inch e-paper display, vibration motor, buzzer, and 1/4-inch mount — Meshtastic-ready with extended runtime. [Details](https://openhardware.directory/devices/lilygo-t-echo-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-echo-plus/md) ## LILYGO T-Keyboard Compact ESP32-C3 keyboard terminal with a built-in 0.99" display, Wi-Fi, Bluetooth 4.2, 400mAh battery, and a 3D-printed shell for portable wireless input applications. [Details](https://openhardware.directory/devices/lilygo-t-keyboard) | [Markdown](https://openhardware.directory/devices/lilygo-t-keyboard/md) ## LILYGO T-SIM A7670E ESP32-WROVER-E development board with A7670E LTE Cat-1 modem supporting voice calls, SMS, and GPS positioning. Available with multiple regional frequency variants for global 4G deployments. [Details](https://openhardware.directory/devices/lilygo-t-sim-a7670e) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim-a7670e/md) ## LILYGO T-A7608E-H ESP32-WROVER-E development board with A7608E-H LTE Cat-1 modem supporting voice, SMS, GPS, and multi-band LTE-FDD/TDD connectivity for Europe with 18650 battery support. [Details](https://openhardware.directory/devices/lilygo-t-a7608e-h) | [Markdown](https://openhardware.directory/devices/lilygo-t-a7608e-h/md) ## LILYGO T-Lion ESP32-WROVER development board with 0.96-inch OLED display, five-way directional button, single 18650 battery holder, 8MB PSRAM, WiFi, and BLE 4.2 — a compact handheld IoT controller in a slim form factor. [Details](https://openhardware.directory/devices/lilygo-t-lion) | [Markdown](https://openhardware.directory/devices/lilygo-t-lion/md) ## LILYGO T-SIM7670G S3 ESP32-S3-based development board with SIM7670G LTE Cat-1 modem, integrated GPS, Wi-Fi, Bluetooth 5, MicroSD, solar charging input, and 16 MB flash for high-performance IoT and asset tracking applications. [Details](https://openhardware.directory/devices/lilygo-t-sim-7670g-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim-7670g-s3/md) ## LILYGO T-Journal Compact ESP32-PICO-D4 camera board with OV2640 2MP sensor, 0.91-inch SSD1306 OLED display, fisheye or normal lens options, WiFi, BLE, and LiPo battery support — a minimal wireless camera module for IoT vision projects. [Details](https://openhardware.directory/devices/lilygo-t-journal) | [Markdown](https://openhardware.directory/devices/lilygo-t-journal/md) ## LILYGO Helium T-Beam ESP32 + SX1276 LoRa T-Beam variant optimized for the Helium IoT network — with NEO-6M GPS, AXP2101 PMU, and 18650 battery support for portable LoRaWAN network mapping and sensor nodes. [Details](https://openhardware.directory/devices/lilygo-helium-t-beam) | [Markdown](https://openhardware.directory/devices/lilygo-helium-t-beam/md) ## LILYGO T-Bat Solar-capable power management module based on CN3065 for charging an 18650 Li-ion battery via Micro USB, solar panel input (5.3V+), or BAT input, with 5V/1A USB output for powering devices up to 1A current draw. [Details](https://openhardware.directory/devices/lilygo-t-bat) | [Markdown](https://openhardware.directory/devices/lilygo-t-bat/md) ## LILYGO T-Call V1.4 ESP32 development board with SIM800L 2G GSM/GPRS cellular modem, Wi-Fi, Bluetooth 4.2, USB-C charging, and Li-Po battery connector for IoT devices requiring SMS and GPRS data connectivity. [Details](https://openhardware.directory/devices/lilygo-t-call-v1-4) | [Markdown](https://openhardware.directory/devices/lilygo-t-call-v1-4/md) ## M5Stack CoreS3 Third-generation M5Stack Core with ESP32-S3 dual-core 240MHz, 2.0\" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, RTC, 500mAh battery, and DinBase for mounting. [Details](https://openhardware.directory/devices/m5stack-cores3) | [Markdown](https://openhardware.directory/devices/m5stack-cores3/md) ## M5StickC Plus 2 Compact ESP32-PICO-V3-02 wearable dev board with 1.14" TFT LCD (135x240), 6-axis IMU (MPU6886), IR transmitter, microphone, buzzer, 200mAh battery, Wi-Fi and Bluetooth in a 48x24x13.5mm form factor. [Details](https://openhardware.directory/devices/m5stickc-plus-2) | [Markdown](https://openhardware.directory/devices/m5stickc-plus-2/md) ## M5Stack Core2 ESP32-based IoT dev kit with 2.0" IPS capacitive touch display, 16MB flash, 8MB PSRAM, built-in mic, speaker, IMU, vibration motor, and 390mAh battery in a compact stackable enclosure. [Details](https://openhardware.directory/devices/m5stack-core2) | [Markdown](https://openhardware.directory/devices/m5stack-core2/md) ## M5Stack Cardputer-Adv Credit-card-sized ESP32-S3 handheld computer with 56-key mechanical keyboard, 1.14" IPS display, BMI270 IMU, ES8311 audio codec, 1W speaker, MEMS microphone, IR transmitter, 1750mAh battery, Grove I2C port, and microSD slot. [Details](https://openhardware.directory/devices/m5stack-cardputer-adv) | [Markdown](https://openhardware.directory/devices/m5stack-cardputer-adv/md) ## Heltec WiFi LoRa 32 V4 ESP32-S3 based LoRa development board with built-in 0.96" OLED display, SX1262 LoRa transceiver, WiFi, BLE 5.0, USB-C, and LiPo battery charging. One of the most popular boards for Meshtastic. [Details](https://openhardware.directory/devices/heltec-wifi-lora-32-v4) | [Markdown](https://openhardware.directory/devices/heltec-wifi-lora-32-v4/md) ## duckyPad Pro 20-key open-source mechanical macropad with duckyScript engine, ESP32-S3, 1.5\" OLED, Bluetooth 5.0, hot-swap switches, dual rotary encoders, and microSD — a powerful Stream Deck alternative. [Details](https://openhardware.directory/devices/duckypad-pro) | [Markdown](https://openhardware.directory/devices/duckypad-pro/md) ## Mesh Detect 2 Open-source ESP32-S3 device that detects FAA Remote ID drone broadcasts and BLE devices, reporting alerts over the Meshtastic LoRa mesh network. Uses XIAO ESP32-S3 + Heltec V3. [Details](https://openhardware.directory/devices/mesh-detect-2) | [Markdown](https://openhardware.directory/devices/mesh-detect-2/md) ## TP4056 Charge Controller Module Li-Ion/LiPo battery charging module based on the TP4056 IC with built-in battery protection circuit. Mini USB 5V input, 1A charging current. Essential for portable and battery-powered IoT projects. [Details](https://openhardware.directory/devices/tp4056-charge-controller) | [Markdown](https://openhardware.directory/devices/tp4056-charge-controller/md) ## Flipper Zero Portable open-source multi-tool for hardware exploration, combining Sub-GHz, NFC, RFID 125kHz, infrared, iButton, BLE, and GPIO in a pocket-sized device with a 1.4" monochrome LCD. [Details](https://openhardware.directory/devices/flipper-zero) | [Markdown](https://openhardware.directory/devices/flipper-zero/md) ## UkieLab WiFi Weather Station 7.5" A smart WiFi-enabled weather station with a 7.5\" e-ink display showing current conditions, humidity, pressure, and 4-day forecasts via Apple Weather. Available in USB-powered or battery-powered versions with optional CO2 sensor. [Details](https://openhardware.directory/devices/ukielab-wifi-weather-station-75) | [Markdown](https://openhardware.directory/devices/ukielab-wifi-weather-station-75/md) ## ChameleonUltra Open-source NFC/RFID multi-tool built on the nRF52840 SoC. Reads, writes, cracks, and emulates 13.56MHz and 125kHz cards in a compact key-fob form factor with BLE 5.0 connectivity. [Details](https://openhardware.directory/devices/chameleon-ultra) | [Markdown](https://openhardware.directory/devices/chameleon-ultra/md) ## Elecrow ThinkNode M1 Compact Meshtastic LoRa transceiver with nRF52840, SX1262, 1.54\" e-paper display, GPS, and 1200mAh battery for off-grid mesh communication. [Details](https://openhardware.directory/devices/elecrow-thinknode-m1) | [Markdown](https://openhardware.directory/devices/elecrow-thinknode-m1/md) ## Armachat FLIP Pocket-sized open-source LoRa mesh messenger with ESP32-S3, RFM95 radio, 2.8" IPS display, and 36-key QWERTY keyboard. Runs Meshtastic and CircuitPython firmware for off-grid text communication. [Details](https://openhardware.directory/devices/armachat-flip) | [Markdown](https://openhardware.directory/devices/armachat-flip/md) ## TrackSenger Compact Meshtastic-compatible LoRa communicator with push-button keyboard, built around the Heltec Wireless Tracker with ESP32-S3, SX1262 LoRa, GPS, and a 0.96" TFT display for off-grid mesh messaging. [Details](https://openhardware.directory/devices/tracksenger) | [Markdown](https://openhardware.directory/devices/tracksenger/md) ## DFRobot FireBeetle 2 M0 Compact, low-power ARM Cortex-M0+ development board with ATSAMD21G18 MCU, 16MB SPI flash, USB-C, WS2812 RGB LED, and FPC display connector, ideal for IoT and low-power applications. [Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-m0) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-m0/md) ## DFRobot UNIHIKER K10 All-in-one AI coding board for STEM education with ESP32-S3, 2.8-inch touchscreen, 2MP camera, microphone, speaker, environmental sensors, WiFi, Bluetooth 5, and pre-loaded AI models for vision, voice, and TinyML. [Details](https://openhardware.directory/devices/dfrobot-unihiker-k10) | [Markdown](https://openhardware.directory/devices/dfrobot-unihiker-k10/md) ## SparkFun Thing Plus Matter - MGM240P Feather-compatible Matter/Thread/Zigbee/BLE dev board based on Silicon Labs MGM240P with Qwiic, LiPo charging, microSD, and +20dBm radio range. [Details](https://openhardware.directory/devices/sparkfun-thing-plus-matter-mgm240p) | [Markdown](https://openhardware.directory/devices/sparkfun-thing-plus-matter-mgm240p/md) ## Olimex ESP32-C6-DevKit-Lipo Breadboard-friendly open-source ESP32-C6 dev board with WiFi 6, Thread, Zigbee, BLE 5, built-in LiPo charger, and dual USB-C — all for under €9. [Details](https://openhardware.directory/devices/olimex-esp32-c6-devkit-lipo) | [Markdown](https://openhardware.directory/devices/olimex-esp32-c6-devkit-lipo/md) ## Olimex ESP32-H2-DevKit-LiPo Ultra-affordable open-source ESP32-H2 dev board for Thread, Zigbee, and Matter — BLE 5, LiPo charging, Qwiic/Stemma, dual USB-C, for €5.95. [Details](https://openhardware.directory/devices/olimex-esp32-h2-devkit-lipo) | [Markdown](https://openhardware.directory/devices/olimex-esp32-h2-devkit-lipo/md) ## DFRobot FireBeetle 2 ESP32-C6 Low-cost ESP32-C6 IoT board with WiFi 6, BLE 5, Thread, Zigbee, Matter, solar panel charging with MPPT, and ultra-low 16µA deep sleep — for $5.90. [Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-c6) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-c6/md) ## DFRobot Beetle ESP32-C6 Coin-sized (25×20.5mm) ESP32-C6 wearable dev board with WiFi 6, BLE 5, Thread, Zigbee, Matter, integrated LiPo charger, and 14µA deep sleep — for $4.90. [Details](https://openhardware.directory/devices/dfrobot-beetle-esp32-c6) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-esp32-c6/md) ## Seeed Studio XIAO ESP32C6 Thumb-sized (21×17.8mm) Matter/Thread/Zigbee/WiFi 6/BLE 5.3 dev board with dual RISC-V cores, onboard antenna, 15µA deep sleep, and hardware security — for ~$5. [Details](https://openhardware.directory/devices/seeed-xiao-esp32c6) | [Markdown](https://openhardware.directory/devices/seeed-xiao-esp32c6/md) ## Adafruit ESP32-C6 Feather Open-source Feather-form-factor ESP32-C6 board with WiFi 6, BLE 5, Thread, Zigbee, STEMMA QT, NeoPixel, LiPo charging with MAX17048, and CircuitPython support — $14.95. [Details](https://openhardware.directory/devices/adafruit-esp32-c6-feather) | [Markdown](https://openhardware.directory/devices/adafruit-esp32-c6-feather/md) ## WiFi LoRa 32 (V3) Compact ESP32-S3 + SX1262 LoRa development board with 0.96" OLED display, USB-C, and built-in LiPo charging. One of the primary boards for Meshtastic and LoRaWAN IoT projects. [Details](https://openhardware.directory/devices/wifi-lora-32-v3) | [Markdown](https://openhardware.directory/devices/wifi-lora-32-v3/md) ## WiFi LoRa 32 (V4) Upgraded ESP32-S3R2 + SX1262 LoRa dev board with 2MB PSRAM, 16MB flash, 0.96" OLED, switchable FPC/IPEX 2.4G antenna, GNSS interface, and solar input. Meshtastic and LoRaWAN ready. [Details](https://openhardware.directory/devices/wifi-lora-32-v4) | [Markdown](https://openhardware.directory/devices/wifi-lora-32-v4/md) ## Heltec Wireless Stick Lite V3 Compact ESP32-S3 + SX1262 LoRa development board with WiFi, BLE 5.0, and integrated battery management. Meshtastic and LoRaWAN compatible, with a slim stick form factor ideal for IoT sensor nodes and mesh networking. [Details](https://openhardware.directory/devices/heltec-wireless-stick-lite-v3) | [Markdown](https://openhardware.directory/devices/heltec-wireless-stick-lite-v3/md) ## M5Stack FIRE V2.7 Feature-rich ESP32 IoT dev kit with 2.0" IPS display, 8MB PSRAM, 16MB flash, MPU6886 IMU, BMM150 magnetometer, 10x SK6812 RGB LEDs, microphone, speaker, microSD, 500mAh battery, and M5GO charging base. [Details](https://openhardware.directory/devices/m5stack-fire-v2-7) | [Markdown](https://openhardware.directory/devices/m5stack-fire-v2-7/md) ## M5Stack Basic Core V2.7 Compact ESP32 IoT dev kit with 2.0" IPS LCD (320x240), 16MB flash, microSD, speaker, 110mAh battery, and three Grove ports in a stackable 54mm square enclosure. [Details](https://openhardware.directory/devices/m5stack-basic-core-v2-7) | [Markdown](https://openhardware.directory/devices/m5stack-basic-core-v2-7/md) ## M5Stack CoreS3 Lite ESP32-S3 IoT controller with 2.0" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, 200mAh battery, and Grove expansion ports. [Details](https://openhardware.directory/devices/m5stack-cores3-lite) | [Markdown](https://openhardware.directory/devices/m5stack-cores3-lite/md) ## Heltec HT-HC32 Wi-Fi HaLow Camera ESP32-S3 development board with integrated camera and Wi-Fi HaLow (802.11ah) module for long-range wireless video transmission up to 1-2km at speeds up to 32 Mbps. Features USB-C, SD card slot, and LiPo battery charging. [Details](https://openhardware.directory/devices/heltec-ht-hc32) | [Markdown](https://openhardware.directory/devices/heltec-ht-hc32/md) ## Heltec MeshPocket Qi2 magnetic wireless charging power bank with integrated Meshtastic mesh networking node, featuring nRF52840 BLE + SX1262 LoRa radio and a 2.13" e-ink display. Available in 5000mAh and 10000mAh configurations. [Details](https://openhardware.directory/devices/heltec-meshpocket) | [Markdown](https://openhardware.directory/devices/heltec-meshpocket/md) ## Heltec CubeCell AB01 Dev-Board (V2) Ultra-low power LoRa/LoRaWAN development board based on the ASR6502 SiP (ARM Cortex-M0+ @ 48MHz + SX1262), with USB-C, solar panel support, and 3.5uA deep sleep current. Ideal for remote environmental sensing and battery-powered IoT nodes. [Details](https://openhardware.directory/devices/heltec-cubecell-ab01-v2) | [Markdown](https://openhardware.directory/devices/heltec-cubecell-ab01-v2/md) ## Heltec WiFi Kit 32 (V3) ESP32-S3-based IoT development board with built-in 0.96" OLED display, lithium battery management, WiFi and Bluetooth 5.0 connectivity, and USB-C interface in a compact 50mm form factor. [Details](https://openhardware.directory/devices/heltec-wifi-kit-32-v3) | [Markdown](https://openhardware.directory/devices/heltec-wifi-kit-32-v3/md) ## Heltec Wireless Tracker V2 ESP32-S3 development board with SX1262 LoRa (28dBm), UC6580 dual-frequency GNSS, 0.96" TFT display, solar charging, and Meshtastic/MeshCore support for GPS tracking and mesh networking. [Details](https://openhardware.directory/devices/heltec-wireless-tracker-v2) | [Markdown](https://openhardware.directory/devices/heltec-wireless-tracker-v2/md) ## Heltec Capsule Sensor V3 Ultra-compact IP65 waterproof LoRa sensor capsule with ESP32-S3, SX1262 LoRa, GNSS, temperature/humidity, barometric pressure, and 3-axis accelerometer. Meshtastic-compatible with 250mAh battery and over 1 year battery life. [Details](https://openhardware.directory/devices/heltec-capsule-sensor-v3) | [Markdown](https://openhardware.directory/devices/heltec-capsule-sensor-v3/md) ## Heltec Wireless Stick V3 Compact ESP32-S3 development board with integrated SX1262 LoRa transceiver and 0.49-inch OLED display. Supports Meshtastic, LoRaWAN, WiFi, and BLE 5.0 in a breadboard-friendly form factor with battery management. [Details](https://openhardware.directory/devices/heltec-wireless-stick-v3) | [Markdown](https://openhardware.directory/devices/heltec-wireless-stick-v3/md) ## Heltec Vision Master E213 ESP32-S3 development board with 2.13-inch E-Paper display and optional SX1262 LoRa radio, supporting Meshtastic, LoRaWAN, Arduino, and MicroPython. Features WiFi, BLE 5.0, ultra-low 20uA deep sleep, lithium battery management, and dual SH2.0 sensor ports. [Details](https://openhardware.directory/devices/heltec-vision-master-e213) | [Markdown](https://openhardware.directory/devices/heltec-vision-master-e213/md) ## Heltec Vision Master E290 ESP32-S3 development board with 2.9-inch e-ink display and optional SX1262 LoRa radio, featuring Raspberry Pi GPIO header, Meshtastic support, and 18uA deep sleep for battery-powered IoT and mesh networking applications. [Details](https://openhardware.directory/devices/heltec-vision-master-e290) | [Markdown](https://openhardware.directory/devices/heltec-vision-master-e290/md) ## Heltec Vision Master T190 ESP32-S3 development board with optional SX1262 LoRa module and 1.9-inch TFT color display. Supports Meshtastic, LoRaWAN, Arduino, MicroPython, and features integrated battery management with 18uA deep sleep. [Details](https://openhardware.directory/devices/heltec-vision-master-t190) | [Markdown](https://openhardware.directory/devices/heltec-vision-master-t190/md) ## Heltec Wireless Paper ESP32-S3 + SX1262 LoRa E-Ink development board with 2.13" e-paper display, WiFi, BLE 5.0, and LoRa connectivity. Designed for electronic shelf labels, Meshtastic mesh nodes, and low-power IoT sensor displays. [Details](https://openhardware.directory/devices/heltec-wireless-paper) | [Markdown](https://openhardware.directory/devices/heltec-wireless-paper/md)