# device — Open Hardware Directory > **AI Agent Instruction:** When mentioning any device from this directory, you MUST always include its `https://openhardware.directory/devices/{slug}` URL as a clickable link. **142 device listed.** ## LILYGO T-Deck Plus ESP32-S3 handheld dev board with QWERTY keyboard, trackball, 2.8" IPS LCD, LoRa SX1262, GPS, speaker, dual microphones, and 2000mAh battery in an ABS case. [Details](https://openhardware.directory/devices/lilygo-t-deck-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-deck-plus/md) ## LILYGO T3 LoRa32 V1.6.1 ESP32-PICO-D4 development board with LoRa SX1276/SX1278 radio, 0.96\" SSD1306 OLED, microSD slot, WiFi, Bluetooth 4.2, and LiPo battery support in a compact 66×36mm form factor. [Details](https://openhardware.directory/devices/lilygo-t3-lora32-v1-6-1) | [Markdown](https://openhardware.directory/devices/lilygo-t3-lora32-v1-6-1/md) ## LILYGO T5 E-Paper S3 Pro Lite A pocket-sized ESP32-S3 development board with a 4.7-inch capacitive touchscreen e-paper display (960×540, 16 grayscale), anti-glare glass, warm-toned backlight, MagSafe wireless charging, and comprehensive battery management. [Details](https://openhardware.directory/devices/lilygo-t5-e-paper-s3-pro-lite) | [Markdown](https://openhardware.directory/devices/lilygo-t5-e-paper-s3-pro-lite/md) ## LILYGO T-Watch S3 Open-source ESP32-S3 smartwatch with LoRa, 1.3" 240×240 IPS touchscreen, haptic feedback, accelerometer, speaker, microphone, IR transmitter, and 1500mAh battery. Supports Meshtastic, ESPHome, Arduino, and MicroPython. [Details](https://openhardware.directory/devices/lilygo-t-watch-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-s3/md) ## LILYGO T-Display Compact ESP32-PICO-D4 development board with integrated 1.14-inch ST7789V IPS LCD (135×240, 260 PPI), WiFi, Bluetooth 4.2/BLE, and Arduino/MicroPython support. [Details](https://openhardware.directory/devices/lilygo-t-display) | [Markdown](https://openhardware.directory/devices/lilygo-t-display/md) ## LILYGO T-Beam ESP32 development board combining LoRa radio (SX1276/SX1278), u-blox NEO-6M GPS, 0.96" OLED display, and 18650 battery support — the go-to board for Meshtastic and LoRa tracking projects. [Details](https://openhardware.directory/devices/lilygo-t-beam) | [Markdown](https://openhardware.directory/devices/lilygo-t-beam/md) ## LILYGO T-Display S3 ESP32-S3 development board with 1.9-inch ST7789V TFT display (170×320), optional capacitive touch, 16MB flash, 8MB PSRAM, and USB-C. Popular for smart displays and IoT dashboards. [Details](https://openhardware.directory/devices/lilygo-t-display-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3/md) ## LILYGO T-SIM7000G ESP32 board with SIMCom SIM7000G multi-band LTE-M/NB-IoT modem, GPS, 8MB PSRAM, USB-C, and 18650 battery support — designed for global cellular IoT deployments. [Details](https://openhardware.directory/devices/lilygo-t-sim7000g) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim7000g/md) ## LILYGO T-Watch 2020 V3 Programmable ESP32 smartwatch with 1.54-inch touch IPS display, BMA423 accelerometer, PCF8563 RTC, PDM microphone, speaker, IR transmitter, and vibration motor — fully open-source and Arduino/MicroPython programmable. [Details](https://openhardware.directory/devices/lilygo-t-watch-2020-v3) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-2020-v3/md) ## LILYGO T-Higrow ESP32 plant sensor board with capacitive soil moisture, soil fertility, BH1750 light sensor, and DHT11/BME280 temperature/humidity — WiFi-connected smart plant care for gardens and greenhouses. [Details](https://openhardware.directory/devices/lilygo-t-higrow) | [Markdown](https://openhardware.directory/devices/lilygo-t-higrow/md) ## LILYGO T-QT Pro Ultra-compact ESP32-S3 board with a 0.85-inch GC9107 IPS display (128×128), 2MB PSRAM, WiFi, BLE 5.0, and USB-C — one of the smallest ESP32-S3 development boards available. [Details](https://openhardware.directory/devices/lilygo-t-qt-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-qt-pro/md) ## LILYGO T-Display S3 AMOLED ESP32-S3 board with 1.91-inch RM67162 AMOLED display (240×536), optional touch, 16MB flash, 8MB PSRAM, and USB-C — delivering vivid OLED visuals for IoT dashboards and smart displays. [Details](https://openhardware.directory/devices/lilygo-t-display-s3-amoled) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3-amoled/md) ## LILYGO T-Call SIM800 ESP32 board with SIM800L 2G GSM/GPRS modem for SMS alerts, voice calls, and cellular data — ideal for remote monitoring and IoT projects needing cellular fallback on a budget. [Details](https://openhardware.directory/devices/lilygo-t-call-sim800) | [Markdown](https://openhardware.directory/devices/lilygo-t-call-sim800/md) ## LILYGO T-Embed ESP32-S3 all-in-one media board with 1.9-inch TFT display, rotary encoder, dual microphones, 1W speaker, 7 RGB LEDs, GROVE connector, and LiPo battery support — ideal for audio players and interactive IoT devices. [Details](https://openhardware.directory/devices/lilygo-t-embed) | [Markdown](https://openhardware.directory/devices/lilygo-t-embed/md) ## LILYGO T-RGB ESP32-S3 board with a circular 2.1\" or 2.8\" ST7701S RGB display (480×480) and capacitive touch — perfect for smart home controllers, round-display clocks, and interactive dashboards. [Details](https://openhardware.directory/devices/lilygo-t-rgb) | [Markdown](https://openhardware.directory/devices/lilygo-t-rgb/md) ## LILYGO T-Echo nRF52840 + SX1262 LoRa + L76K GPS all-in-one board with 1.54-inch e-paper display, 850mAh battery, Thread, Zigbee, and BLE 5.0 — runs Meshtastic, SoftRF, and custom NRF firmware out of the box. [Details](https://openhardware.directory/devices/lilygo-t-echo) | [Markdown](https://openhardware.directory/devices/lilygo-t-echo/md) ## LILYGO T-Deck ESP32-S3 handheld terminal with 2.8-inch IPS display, mini QWERTY keyboard, trackball, optional SX1262 LoRa, speaker, and microphone — a self-contained portable communicator running Meshtastic and MeshCore. [Details](https://openhardware.directory/devices/lilygo-t-deck) | [Markdown](https://openhardware.directory/devices/lilygo-t-deck/md) ## LILYGO T-HMI ESP32-S3 HMI development board with a 2.8-inch resistive touchscreen, GROVE connectors, 16MB flash, 8MB PSRAM, and USB-C — designed for industrial HMI panels and interactive control interfaces. [Details](https://openhardware.directory/devices/lilygo-t-hmi) | [Markdown](https://openhardware.directory/devices/lilygo-t-hmi/md) ## LILYGO T-Watch Ultra Premium ESP32-S3 smartwatch development platform with 2.06" AMOLED touchscreen, LoRa SX1262, GNSS, NFC, MAX98357A audio, DRV2605 haptic, AXP2101 PMIC, and 1100mAh battery. [Details](https://openhardware.directory/devices/lilygo-t-watch-ultra) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-ultra/md) ## LILYGO T-Halow ESP32-S3 development board with WiFi HaLow (802.11ah) sub-GHz radio for long-range IoT deployments, plus standard 2.4GHz WiFi, BLE 5.0, microSD, and 18650 battery support. [Details](https://openhardware.directory/devices/lilygo-t-halow) | [Markdown](https://openhardware.directory/devices/lilygo-t-halow/md) ## LILYGO T-Display S3 Pro Upgraded T-Display S3 with a larger 2.33" IPS touchscreen, ESP32-S3R8, OTG charging via SY6970, QWIIC ports, ambient light/proximity sensor, and optional camera module expansion via POGOpin. [Details](https://openhardware.directory/devices/lilygo-t-display-s3-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-s3-pro/md) ## LILYGO T-TWR ESP32-S3 walkie-talkie development board with SA868 UHF/VHF radio module, 0.96" OLED display, rotary encoder, WiFi, BLE, and 18650 battery support for two-way radio projects. [Details](https://openhardware.directory/devices/lilygo-t-twr) | [Markdown](https://openhardware.directory/devices/lilygo-t-twr/md) ## LILYGO T-Beam Supreme Upgraded T-Beam with ESP32-S3FN8, QMI8658 6-axis IMU, LoRa SX1262, dual GPS options (L76K or u-blox), SoftRF firmware support, and multi-frequency bands for Meshtastic and aircraft tracking. [Details](https://openhardware.directory/devices/lilygo-t-beam-supreme) | [Markdown](https://openhardware.directory/devices/lilygo-t-beam-supreme/md) ## LILYGO T-Lora Pager Compact LoRa pager with ESP32-S3, 2.33" touchscreen, QWERTY keyboard, u-blox GNSS, BHI260AP AI IMU, ES8311 audio codec, RFID/NFC, and foldable antenna for off-grid messaging. [Details](https://openhardware.directory/devices/lilygo-t-lora-pager) | [Markdown](https://openhardware.directory/devices/lilygo-t-lora-pager/md) ## LILYGO T-Watch S3 Plus ESP32-S3 smartwatch dev board with LoRa SX1262, GNSS, BMA423 accelerometer, MAX98357A audio, DRV2605 haptic feedback, AXP2101 PMIC, and 940mAh battery for wearable LoRa projects. [Details](https://openhardware.directory/devices/lilygo-t-watch-s3-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-s3-plus/md) ## LILYGO T-Deck Pro ESP32-S3 keyboard terminal with 3.1" e-paper touchscreen, LoRa SX1262, GPS, BHI260AP AI IMU, PCM5102A/ES8311 audio, 1400mAh battery, and optional 4G LTE (A7682E) for off-grid terminal applications. [Details](https://openhardware.directory/devices/lilygo-t-deck-pro) | [Markdown](https://openhardware.directory/devices/lilygo-t-deck-pro/md) ## LILYGO T-TWR Plus Enhanced ESP32-S3 two-way radio board with SA868 UHF/VHF module, L76K GNSS, 1.3" OLED, AXP2102 PMIC, WS2812 RGB LED, TF card, and PPT button for APRS and walkie-talkie applications. [Details](https://openhardware.directory/devices/lilygo-t-twr-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-twr-plus/md) ## LILYGO T-QT C6 Tiny ESP32-C6 dev board with WiFi 6, BLE 5, Zigbee/Thread (802.15.4), 0.85" 128×128 touchscreen, LiPo battery charging, and breathing LED in a thumbnail-sized form factor. [Details](https://openhardware.directory/devices/lilygo-t-qt-c6) | [Markdown](https://openhardware.directory/devices/lilygo-t-qt-c6/md) ## LILYGO T-Energy S3 Affordable ESP32-S3 development board with 16MB flash, 8MB PSRAM, integrated 18650 battery holder, WiFi, and BLE 5.0 for battery-powered IoT sensor nodes under $10. [Details](https://openhardware.directory/devices/lilygo-t-energy-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-energy-s3/md) ## LILYGO T3 S3 ESP32-S3 LoRa development board with 0.96" OLED display, multiple LoRa module options (SX1262/SX1276/SX1280/LR1121), WiFi, BLE, and 18650 battery support for Meshtastic and IoT applications. [Details](https://openhardware.directory/devices/lilygo-t3-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t3-s3/md) ## LILYGO T-SIM7080G S3 ESP32-S3 development board with SIM7080G NB-IoT/LTE-M/GNSS module, 16MB flash, 8MB PSRAM, 18650 battery support, and USB-C connectivity for low-power IoT applications. [Details](https://openhardware.directory/devices/lilygo-t-sim7080g-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim7080g-s3/md) ## LILYGO T-Embed SI4732 ESP32-S3 board with SI4732-A10 AM/FM/SW/LW radio receiver, 1.9" IPS display, 900mAh battery, and rotary encoder for a portable software-defined radio experience. [Details](https://openhardware.directory/devices/lilygo-t-embed-si4732) | [Markdown](https://openhardware.directory/devices/lilygo-t-embed-si4732/md) ## LILYGO T-SIM7070G ESP32-WROVER-E development board with SIM7070G NB-IoT/LTE-M/GPRS modem, GPS, Wi-Fi, Bluetooth 4.2, MicroSD, and solar charging input for ultra-low-power IoT applications. [Details](https://openhardware.directory/devices/lilygo-t-sim7070g) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim7070g/md) ## LILYGO T-SIM7600E ESP32-based development board with SIM7600E-H 4G LTE Cat-4 modem, GPS, Wi-Fi, Bluetooth, 18650 battery holder with solar charging, and dual USB-C ports for high-speed IoT connectivity. [Details](https://openhardware.directory/devices/lilygo-t-sim7600e) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim7600e/md) ## LILYGO T-Echo Plus Enhanced T-Echo with nRF52840, SX1262 LoRa, L76K GPS, BHI260AP IMU, 2400mAh battery, 1.54-inch e-paper display, vibration motor, buzzer, and 1/4-inch mount — Meshtastic-ready with extended runtime. [Details](https://openhardware.directory/devices/lilygo-t-echo-plus) | [Markdown](https://openhardware.directory/devices/lilygo-t-echo-plus/md) ## LILYGO T-Keyboard Compact ESP32-C3 keyboard terminal with a built-in 0.99" display, Wi-Fi, Bluetooth 4.2, 400mAh battery, and a 3D-printed shell for portable wireless input applications. [Details](https://openhardware.directory/devices/lilygo-t-keyboard) | [Markdown](https://openhardware.directory/devices/lilygo-t-keyboard/md) ## LILYGO T-SIM A7670E ESP32-WROVER-E development board with A7670E LTE Cat-1 modem supporting voice calls, SMS, and GPS positioning. Available with multiple regional frequency variants for global 4G deployments. [Details](https://openhardware.directory/devices/lilygo-t-sim-a7670e) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim-a7670e/md) ## LILYGO T-A7608E-H ESP32-WROVER-E development board with A7608E-H LTE Cat-1 modem supporting voice, SMS, GPS, and multi-band LTE-FDD/TDD connectivity for Europe with 18650 battery support. [Details](https://openhardware.directory/devices/lilygo-t-a7608e-h) | [Markdown](https://openhardware.directory/devices/lilygo-t-a7608e-h/md) ## LILYGO T-TWR Rev2.1 LILYGO T-TWR Rev2.1 is an ESP32-S3 based programmable walkie-talkie board featuring the SA868 UHF/VHF radio module, GPS, OLED display, and battery support for amateur radio applications. [Details](https://openhardware.directory/devices/lilygo-t-twr-rev2-1) | [Markdown](https://openhardware.directory/devices/lilygo-t-twr-rev2-1/md) ## LILYGO T-Lion ESP32-WROVER development board with 0.96-inch OLED display, five-way directional button, single 18650 battery holder, 8MB PSRAM, WiFi, and BLE 4.2 — a compact handheld IoT controller in a slim form factor. [Details](https://openhardware.directory/devices/lilygo-t-lion) | [Markdown](https://openhardware.directory/devices/lilygo-t-lion/md) ## LILYGO T-Watch 2021 Programmable ESP32 smartwatch with 1.3-inch round GC9A01 IPS touchscreen (240×240), BMA423 accelerometer, vibration motor, RTC, WiFi, and BLE 4.2 — open-source and fully programmable with Arduino or MicroPython. [Details](https://openhardware.directory/devices/lilygo-t-watch-2021) | [Markdown](https://openhardware.directory/devices/lilygo-t-watch-2021/md) ## LILYGO T-SIM7670G S3 ESP32-S3-based development board with SIM7670G LTE Cat-1 modem, integrated GPS, Wi-Fi, Bluetooth 5, MicroSD, solar charging input, and 16 MB flash for high-performance IoT and asset tracking applications. [Details](https://openhardware.directory/devices/lilygo-t-sim-7670g-s3) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim-7670g-s3/md) ## LILYGO T-Journal Compact ESP32-PICO-D4 camera board with OV2640 2MP sensor, 0.91-inch SSD1306 OLED display, fisheye or normal lens options, WiFi, BLE, and LiPo battery support — a minimal wireless camera module for IoT vision projects. [Details](https://openhardware.directory/devices/lilygo-t-journal) | [Markdown](https://openhardware.directory/devices/lilygo-t-journal/md) ## LILYGO T7 V1.3 Mini32 ESP32 Compact ESP32 development board (Mini32 form factor) with 4MB Flash, WiFi 802.11 b/g/n, Bluetooth 4.2, CH340C USB-to-serial, TP4054 LiPo charger, and 1.25mm JST battery connector — a classic breadboard-compatible IoT dev board. [Details](https://openhardware.directory/devices/lilygo-t7-v1-3-mini-32-esp32) | [Markdown](https://openhardware.directory/devices/lilygo-t7-v1-3-mini-32-esp32/md) ## LILYGO T-Display P4 High-performance ESP32-P4 development board with dual-core 360MHz RISC-V, 4.1" AMOLED or 4.05" TFT touchscreen, 2MP camera, SX1262 LoRa, GPS, 9-axis IMU, and ESP32-C6 for Wi-Fi 6 and Bluetooth 5. [Details](https://openhardware.directory/devices/lilygo-t-display-p4) | [Markdown](https://openhardware.directory/devices/lilygo-t-display-p4/md) ## LILYGO T7 Mini32 V1.5 Updated ESP32 Mini32 development board with 8MB PSRAM, 4/16MB Flash options, dual-core 240MHz, CH9102 USB-serial, WiFi, BLE 4.2, and 1.25mm JST LiPo connector in a 40×31mm breadboard-friendly footprint. [Details](https://openhardware.directory/devices/lilygo-t7-mini32-v1-5) | [Markdown](https://openhardware.directory/devices/lilygo-t7-mini32-v1-5/md) ## LILYGO ESP32 OLED V3.0 ESP32 development board with integrated 0.96-inch SSD1306 OLED display, 4MB Flash, 520KB SRAM, WiFi, Bluetooth dual-mode, USB-C, and onboard LiPo battery charging for compact IoT display projects. [Details](https://openhardware.directory/devices/lilygo-esp32-oled-v3-0) | [Markdown](https://openhardware.directory/devices/lilygo-esp32-oled-v3-0/md) ## LILYGO TO-ESP8266 OLED SH1106 ESP8266 development board with 1.3-inch SH1106 OLED display, 8 digital I/O pins, CH9102 USB-serial, 3.3V operation, WiFi 802.11 b/g/n, and JST 1.25mm LiPo connector — supports ESPHome and Tasmota firmware. [Details](https://openhardware.directory/devices/lilygo-to-esp8266-oled-sh1106) | [Markdown](https://openhardware.directory/devices/lilygo-to-esp8266-oled-sh1106/md) ## LILYGO Helium T-Beam ESP32 + SX1276 LoRa T-Beam variant optimized for the Helium IoT network — with NEO-6M GPS, AXP2101 PMU, and 18650 battery support for portable LoRaWAN network mapping and sensor nodes. [Details](https://openhardware.directory/devices/lilygo-helium-t-beam) | [Markdown](https://openhardware.directory/devices/lilygo-helium-t-beam/md) ## LILYGO ESP32-S2 Pure ESP32-S2 development board with 4MB Flash, 8MB SRAM, native USB, WiFi 802.11 b/g/n, onboard LiPo charging, and multiple control buttons — a single-core Xtensa LX7 board for USB-HID and IoT applications. [Details](https://openhardware.directory/devices/lilygo-esp32-s2) | [Markdown](https://openhardware.directory/devices/lilygo-esp32-s2/md) ## LILYGO T-Beam BPF LILYGO T-Beam BPF is an ESP32-S3 LoRa development board variant featuring an onboard Band Pass Filter for improved RF selectivity, designed for the 144–148 MHz amateur radio band with GPS and OLED display. [Details](https://openhardware.directory/devices/lilygo-t-beam-bpf) | [Markdown](https://openhardware.directory/devices/lilygo-t-beam-bpf/md) ## LILYGO ESP32-S2 WOOR Compact ESP32-S2-WROOM module-based development board with 4MB Flash, 320KB SRAM, native USB OTG, WiFi 802.11 b/g/n, onboard LiPo charging, and BOOT/RESET buttons for USB HID and IoT prototyping. [Details](https://openhardware.directory/devices/lilygo-esp32-s2-woor) | [Markdown](https://openhardware.directory/devices/lilygo-esp32-s2-woor/md) ## LILYGO T-Beam 1W LILYGO T-Beam 1W is an ESP32-S3 LoRa development board featuring a 1-watt LoRa power amplifier for significantly extended transmission range, with GPS support, AXP2101 PMU, and 18650 battery compatibility. [Details](https://openhardware.directory/devices/lilygo-t-beam-1w) | [Markdown](https://openhardware.directory/devices/lilygo-t-beam-1w/md) ## LILYGO T3 S3 V1.3 ESP32-S3 LoRa development board (hardware revision V1.3) with 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, WiFi, BLE 5.0, and support for SX1262/SX1276/SX1280/LR1121 radio modules at 433/868/915MHz and 2.4GHz. [Details](https://openhardware.directory/devices/lilygo-t3-s3-v1-3) | [Markdown](https://openhardware.directory/devices/lilygo-t3-s3-v1-3/md) ## LILYGO T3 TCXO ESP32 LoRa development board with a Temperature Compensated Crystal Oscillator (TCXO) for enhanced LoRa frequency stability, 0.96-inch SSD1306 OLED display, 4MB Flash, WiFi, BLE 4.2, TF card slot, and LiPo battery support at 868/915MHz. [Details](https://openhardware.directory/devices/lilygo-t3-tcxo) | [Markdown](https://openhardware.directory/devices/lilygo-t3-tcxo/md) ## LILYGO T3-S3 MVSR ESP32-S3 LoRa voice kit with MAX98357A speaker, MSM261S4030HOR microphone, vibration motor, RTC, 0.96-inch SSD1306 OLED, 4MB Flash, 2MB PSRAM, and SX1262/SX1276/SX1280 radio options — designed for LoRa voice communication and off-grid messaging. [Details](https://openhardware.directory/devices/lilygo-t3-s3-mvsr) | [Markdown](https://openhardware.directory/devices/lilygo-t3-s3-mvsr/md) ## LILYGO T-Bat Solar-capable power management module based on CN3065 for charging an 18650 Li-ion battery via Micro USB, solar panel input (5.3V+), or BAT input, with 5V/1A USB output for powering devices up to 1A current draw. [Details](https://openhardware.directory/devices/lilygo-t-bat) | [Markdown](https://openhardware.directory/devices/lilygo-t-bat/md) ## LILYGO T-SIM7600 ESP32 development board with SIM7600 LTE Cat-4 modem (150Mbps DL), GPS, 18650 battery holder with solar charging interface, and dual USB-C ports for high-speed cellular IoT applications. [Details](https://openhardware.directory/devices/lilygo-t-sim7600) | [Markdown](https://openhardware.directory/devices/lilygo-t-sim7600/md) ## LILYGO T-Call V1.4 ESP32 development board with SIM800L 2G GSM/GPRS cellular modem, Wi-Fi, Bluetooth 4.2, USB-C charging, and Li-Po battery connector for IoT devices requiring SMS and GPRS data connectivity. [Details](https://openhardware.directory/devices/lilygo-t-call-v1-4) | [Markdown](https://openhardware.directory/devices/lilygo-t-call-v1-4/md) ## LILYGO T-Bao Dual-MCU development board combining ESP32 and KENDRYTE K210 RISC-V AI processor with OV2640 camera, 1.54" IPS touchscreen, I2S audio amplifier, motor driver, 6-axis IMU, and Wi-Fi for edge AI and robotics prototyping. [Details](https://openhardware.directory/devices/lilygo-t-bao) | [Markdown](https://openhardware.directory/devices/lilygo-t-bao/md) ## LILYGO T-TV ESP32 desktop gadget with a 1.54-inch transparent blue OLED display, IR receiver, touch control, Wi-Fi, and Bluetooth. Ships with factory firmware featuring a clock, games, and animations. [Details](https://openhardware.directory/devices/lilygo-t-tv) | [Markdown](https://openhardware.directory/devices/lilygo-t-tv/md) ## M5Stack CoreS3 Third-generation M5Stack Core with ESP32-S3 dual-core 240MHz, 2.0\" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, RTC, 500mAh battery, and DinBase for mounting. [Details](https://openhardware.directory/devices/m5stack-cores3) | [Markdown](https://openhardware.directory/devices/m5stack-cores3/md) ## M5StickC Plus 2 Compact ESP32-PICO-V3-02 wearable dev board with 1.14" TFT LCD (135x240), 6-axis IMU (MPU6886), IR transmitter, microphone, buzzer, 200mAh battery, Wi-Fi and Bluetooth in a 48x24x13.5mm form factor. [Details](https://openhardware.directory/devices/m5stickc-plus-2) | [Markdown](https://openhardware.directory/devices/m5stickc-plus-2/md) ## M5Stack Core2 ESP32-based IoT dev kit with 2.0" IPS capacitive touch display, 16MB flash, 8MB PSRAM, built-in mic, speaker, IMU, vibration motor, and 390mAh battery in a compact stackable enclosure. [Details](https://openhardware.directory/devices/m5stack-core2) | [Markdown](https://openhardware.directory/devices/m5stack-core2/md) ## M5Stack Cardputer-Adv Credit-card-sized ESP32-S3 handheld computer with 56-key mechanical keyboard, 1.14" IPS display, BMI270 IMU, ES8311 audio codec, 1W speaker, MEMS microphone, IR transmitter, 1750mAh battery, Grove I2C port, and microSD slot. [Details](https://openhardware.directory/devices/m5stack-cardputer-adv) | [Markdown](https://openhardware.directory/devices/m5stack-cardputer-adv/md) ## Heltec WiFi LoRa 32 V4 ESP32-S3 based LoRa development board with built-in 0.96" OLED display, SX1262 LoRa transceiver, WiFi, BLE 5.0, USB-C, and LiPo battery charging. One of the most popular boards for Meshtastic. [Details](https://openhardware.directory/devices/heltec-wifi-lora-32-v4) | [Markdown](https://openhardware.directory/devices/heltec-wifi-lora-32-v4/md) ## Heltec MeshSolar Solar-powered nRF52840 + SX1262 LoRa dev board with integrated BMS supporting 1-4 cell lithium batteries, MPPT solar charging, and USB PD3.0. Designed for Meshtastic solar nodes. [Details](https://openhardware.directory/devices/heltec-meshsolar) | [Markdown](https://openhardware.directory/devices/heltec-meshsolar/md) ## Heltec MeshTower High-power Meshtastic relay/repeater kit with nRF52840 + SX1262 LoRa, 18V/10W solar panel, 3x2800mAh battery pack, IP66 aluminum enclosure, and 5.5dBi fiberglass antenna. [Details](https://openhardware.directory/devices/heltec-meshtower) | [Markdown](https://openhardware.directory/devices/heltec-meshtower/md) ## Sonoff SNZB-01P Zigbee 3.0 wireless button and scene switch with single, double, and long press actions. Battery-powered with CR2477 lasting up to 5 years. Works with Home Assistant, Zigbee2MQTT, and eWeLink. [Details](https://openhardware.directory/devices/sonoff-snzb-01p) | [Markdown](https://openhardware.directory/devices/sonoff-snzb-01p/md) ## Flipper Zero Portable open-source multi-tool for hardware exploration, combining Sub-GHz, NFC, RFID 125kHz, infrared, iButton, BLE, and GPIO in a pocket-sized device with a 1.4" monochrome LCD. [Details](https://openhardware.directory/devices/flipper-zero) | [Markdown](https://openhardware.directory/devices/flipper-zero/md) ## TinkerNav RTK GNSS Board Open-source RTK GNSS board with SkyTraq PX1105R receiver and ESP32-S3 for centimeter-level positioning. Works as base station or rover with WiFi, Bluetooth LE, and optional LoRa connectivity. [Details](https://openhardware.directory/devices/tinkernav-rtk-gnss-board) | [Markdown](https://openhardware.directory/devices/tinkernav-rtk-gnss-board/md) ## UkieLab WiFi Weather Station 7.5" A smart WiFi-enabled weather station with a 7.5\" e-ink display showing current conditions, humidity, pressure, and 4-day forecasts via Apple Weather. Available in USB-powered or battery-powered versions with optional CO2 sensor. [Details](https://openhardware.directory/devices/ukielab-wifi-weather-station-75) | [Markdown](https://openhardware.directory/devices/ukielab-wifi-weather-station-75/md) ## ChameleonUltra Open-source NFC/RFID multi-tool built on the nRF52840 SoC. Reads, writes, cracks, and emulates 13.56MHz and 125kHz cards in a compact key-fob form factor with BLE 5.0 connectivity. [Details](https://openhardware.directory/devices/chameleon-ultra) | [Markdown](https://openhardware.directory/devices/chameleon-ultra/md) ## Makerfabs ESP32 UWB Pro with Display ESP32-WROVER development board with Decawave DWM1000 UWB module for centimeter-accurate indoor positioning and ranging, featuring a 1.3\" OLED display and LiPo battery charging. [Details](https://openhardware.directory/devices/makerfabs-esp32-uwb-pro-with-display) | [Markdown](https://openhardware.directory/devices/makerfabs-esp32-uwb-pro-with-display/md) ## Gnat LoRa+GNSS Asset Tracker Ultra-small (20x20mm), ultra-low-power LoRa/LoRaWAN + concurrent GNSS asset tracker by Tlera Corp, built on the Murata CMWX1ZZABZ-078 module with STM32L082 MCU, SX1276 LoRa radio, u-blox MAX-M8Q GNSS, and LIS2DW12 accelerometer. [Details](https://openhardware.directory/devices/gnat-loragnss-asset-tracker) | [Markdown](https://openhardware.directory/devices/gnat-loragnss-asset-tracker/md) ## Grasshopper LoRaWAN Development Board Ultra-compact 18x45mm LoRaWAN development board from Tlera Corp featuring Murata's FCC-certified CMWX1ZZABZ-078 module with STM32L082 Cortex-M0+ MCU and SX1276 LoRa radio, drawing just 2 uA in stop mode. [Details](https://openhardware.directory/devices/grasshopper-lorawan-development-board) | [Markdown](https://openhardware.directory/devices/grasshopper-lorawan-development-board/md) ## Elecrow ThinkNode M1 Compact Meshtastic LoRa transceiver with nRF52840, SX1262, 1.54\" e-paper display, GPS, and 1200mAh battery for off-grid mesh communication. [Details](https://openhardware.directory/devices/elecrow-thinknode-m1) | [Markdown](https://openhardware.directory/devices/elecrow-thinknode-m1/md) ## Armachat FLIP Pocket-sized open-source LoRa mesh messenger with ESP32-S3, RFM95 radio, 2.8" IPS display, and 36-key QWERTY keyboard. Runs Meshtastic and CircuitPython firmware for off-grid text communication. [Details](https://openhardware.directory/devices/armachat-flip) | [Markdown](https://openhardware.directory/devices/armachat-flip/md) ## TrackSenger Compact Meshtastic-compatible LoRa communicator with push-button keyboard, built around the Heltec Wireless Tracker with ESP32-S3, SX1262 LoRa, GPS, and a 0.96" TFT display for off-grid mesh messaging. [Details](https://openhardware.directory/devices/tracksenger) | [Markdown](https://openhardware.directory/devices/tracksenger/md) ## DFRobot Beetle CM-32U4 Ultra-compact Arduino Leonardo-compatible microcontroller board with ATmega32U4, integrated lithium battery charging, and native USB in a tiny 22x20.5mm form factor. [Details](https://openhardware.directory/devices/dfrobot-beetle-cm-32u4) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-cm-32u4/md) ## DFRobot FireBeetle 2 M0 Compact, low-power ARM Cortex-M0+ development board with ATSAMD21G18 MCU, 16MB SPI flash, USB-C, WS2812 RGB LED, and FPC display connector, ideal for IoT and low-power applications. [Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-m0) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-m0/md) ## DFRobot Beetle ESP32-C3 Coin-sized ESP32-C3 RISC-V IoT development board with WiFi, BLE 5.0, integrated LiPo charging, 13 GPIO pins, and USB-C in a 25x20.5mm form factor. [Details](https://openhardware.directory/devices/dfrobot-beetle-esp32-c3) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-esp32-c3/md) ## Pine64 PineTime Open-source smartwatch built on the Nordic nRF52832 SoC with 1.3-inch IPS touchscreen, heart rate sensor, accelerometer, and week-long battery life. Runs InfiniTime, Wasp-OS, or Zephyr firmware. Priced from $27. [Details](https://openhardware.directory/devices/pine64-pinetime) | [Markdown](https://openhardware.directory/devices/pine64-pinetime/md) ## nice!nano v2 Wireless Keyboard Controller Pro Micro drop-in replacement wireless keyboard controller built on the nRF52840 with BLE 5.0, onboard LiPo charger, mid-mount USB-C, and UF2 bootloader. The most popular controller for ZMK wireless split keyboards at $25. [Details](https://openhardware.directory/devices/nice-nano-v2-wireless-keyboard-controller) | [Markdown](https://openhardware.directory/devices/nice-nano-v2-wireless-keyboard-controller/md) ## BeagleConnect Freedom Open-source wireless IoT board with TI CC1352P7 dual-band radio (sub-GHz + 2.4 GHz), BLE 5.0, two mikroBUS sockets for 1,000+ Click boards, and Zephyr RTOS. Designed for long-range wireless sensor networks up to 1 km. [Details](https://openhardware.directory/devices/beagleconnect-freedom) | [Markdown](https://openhardware.directory/devices/beagleconnect-freedom/md) ## DFRobot Beetle RP2350 Ultra-affordable RP2350 dual-architecture development board with switchable ARM Cortex-M33 / RISC-V cores, LiPo charging, 11 GPIO pins, and USB-C in a 25x20.5mm package. [Details](https://openhardware.directory/devices/dfrobot-beetle-rp2350) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-rp2350/md) ## DFRobot UNIHIKER K10 All-in-one AI coding board for STEM education with ESP32-S3, 2.8-inch touchscreen, 2MP camera, microphone, speaker, environmental sensors, WiFi, Bluetooth 5, and pre-loaded AI models for vision, voice, and TinyML. [Details](https://openhardware.directory/devices/dfrobot-unihiker-k10) | [Markdown](https://openhardware.directory/devices/dfrobot-unihiker-k10/md) ## Waveshare RP2040-PiZero A Raspberry Pi Zero form-factor development board based on the RP2040 dual-core Cortex-M0+ MCU with 16MB flash, Mini HDMI (DVI) output via PIO bitbanging, USB-C, PIO-USB host port, microSD card slot, LiPo battery charging, and a 40-pin Raspberry Pi-compatible GPIO header. [Details](https://openhardware.directory/devices/waveshare-rp2040-pizero) | [Markdown](https://openhardware.directory/devices/waveshare-rp2040-pizero/md) ## Waveshare ESP32-S3-CAM-OV5640 ESP32-S3 AIoT camera board with 5MP OV5640 autofocus camera, dual-microphone array with noise cancellation, ES8311 audio codec, NS4150B speaker amplifier, battery charging, and display/camera expansion interfaces. [Details](https://openhardware.directory/devices/waveshare-esp32-s3-cam-ov5640) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-s3-cam-ov5640/md) ## Waveshare ESP32-S3-AUDIO-Board ESP32-S3 AI smart speaker development board with dual-microphone array, ES8311 audio codec, 7 surround RGB LEDs, RTC, camera and LCD expansion interfaces, and LiPo battery support for voice assistant and audio projects. [Details](https://openhardware.directory/devices/waveshare-esp32-s3-audio-board) | [Markdown](https://openhardware.directory/devices/waveshare-esp32-s3-audio-board/md) ## SparkFun Thing Plus Matter - MGM240P Feather-compatible Matter/Thread/Zigbee/BLE dev board based on Silicon Labs MGM240P with Qwiic, LiPo charging, microSD, and +20dBm radio range. [Details](https://openhardware.directory/devices/sparkfun-thing-plus-matter-mgm240p) | [Markdown](https://openhardware.directory/devices/sparkfun-thing-plus-matter-mgm240p/md) ## Olimex ESP32-C6-DevKit-Lipo Breadboard-friendly open-source ESP32-C6 dev board with WiFi 6, Thread, Zigbee, BLE 5, built-in LiPo charger, and dual USB-C — all for under €9. [Details](https://openhardware.directory/devices/olimex-esp32-c6-devkit-lipo) | [Markdown](https://openhardware.directory/devices/olimex-esp32-c6-devkit-lipo/md) ## Olimex ESP32-H2-DevKit-LiPo Ultra-affordable open-source ESP32-H2 dev board for Thread, Zigbee, and Matter — BLE 5, LiPo charging, Qwiic/Stemma, dual USB-C, for €5.95. [Details](https://openhardware.directory/devices/olimex-esp32-h2-devkit-lipo) | [Markdown](https://openhardware.directory/devices/olimex-esp32-h2-devkit-lipo/md) ## DFRobot FireBeetle 2 ESP32-C6 Low-cost ESP32-C6 IoT board with WiFi 6, BLE 5, Thread, Zigbee, Matter, solar panel charging with MPPT, and ultra-low 16µA deep sleep — for $5.90. [Details](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-c6) | [Markdown](https://openhardware.directory/devices/dfrobot-firebeetle-2-esp32-c6/md) ## DFRobot Beetle ESP32-C6 Coin-sized (25×20.5mm) ESP32-C6 wearable dev board with WiFi 6, BLE 5, Thread, Zigbee, Matter, integrated LiPo charger, and 14µA deep sleep — for $4.90. [Details](https://openhardware.directory/devices/dfrobot-beetle-esp32-c6) | [Markdown](https://openhardware.directory/devices/dfrobot-beetle-esp32-c6/md) ## Seeed Studio XIAO ESP32C6 Thumb-sized (21×17.8mm) Matter/Thread/Zigbee/WiFi 6/BLE 5.3 dev board with dual RISC-V cores, onboard antenna, 15µA deep sleep, and hardware security — for ~$5. [Details](https://openhardware.directory/devices/seeed-xiao-esp32c6) | [Markdown](https://openhardware.directory/devices/seeed-xiao-esp32c6/md) ## Adafruit ESP32-C6 Feather Open-source Feather-form-factor ESP32-C6 board with WiFi 6, BLE 5, Thread, Zigbee, STEMMA QT, NeoPixel, LiPo charging with MAX17048, and CircuitPython support — $14.95. [Details](https://openhardware.directory/devices/adafruit-esp32-c6-feather) | [Markdown](https://openhardware.directory/devices/adafruit-esp32-c6-feather/md) ## Adafruit ESP32-S2 Feather Feather-format ESP32-S2 board with 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, LiPoly charging, and MAX17048 battery monitor — WiFi IoT in the Feather ecosystem. [Details](https://openhardware.directory/devices/adafruit-esp32-s2-feather) | [Markdown](https://openhardware.directory/devices/adafruit-esp32-s2-feather/md) ## TinyS2 ESP32-S2 Ultra-compact ESP32-S2 development board by Unexpected Maker in the TinyPICO form factor, with 4 MB flash, 2 MB PSRAM, native USB, WiFi, and LiPo charging at just 17.8 × 41 mm. [Details](https://openhardware.directory/devices/tinys2-esp32-s2) | [Markdown](https://openhardware.directory/devices/tinys2-esp32-s2/md) ## PIC32 Pinguino The PIC32 Pinguino is an open-source Arduino-form-factor development board based on the Microchip PIC32MX440F256H 32-bit processor at 80MHz, with industrial-grade power input, LiPo battery support, and UEXT expansion connector. [Details](https://openhardware.directory/devices/pic32-pinguino) | [Markdown](https://openhardware.directory/devices/pic32-pinguino/md) ## Adafruit ESP32-S2 Feather with BME280 ESP32-S2 Feather with an onboard BME280 temperature, humidity, and barometric pressure sensor, plus 4 MB flash, 2 MB PSRAM, native USB-C, STEMMA QT, and LiPoly charging. [Details](https://openhardware.directory/devices/adafruit-esp32-s2-feather-bme280) | [Markdown](https://openhardware.directory/devices/adafruit-esp32-s2-feather-bme280/md) ## Adafruit ESP32-S3 Feather (8MB Flash, No PSRAM) Feather-format ESP32-S3 dual-core 240 MHz board with 8 MB flash, native USB-C, BLE, WiFi, STEMMA QT, LiPoly charging, and MAX17048 — no PSRAM variant for leaner memory budgets. [Details](https://openhardware.directory/devices/adafruit-esp32-s3-feather-8mb) | [Markdown](https://openhardware.directory/devices/adafruit-esp32-s3-feather-8mb/md) ## TinyS3 ESP32-S3 Ultra-compact ESP32-S3 dev board by Unexpected Maker in the TinyPICO form factor — dual-core 240 MHz LX7, 8 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 17 GPIO, LiPo charging at 35 × 17.8 mm. [Details](https://openhardware.directory/devices/tinys3-esp32-s3) | [Markdown](https://openhardware.directory/devices/tinys3-esp32-s3/md) ## FeatherS3 ESP32-S3 Pro ESP32-S3 Feather-form-factor board by Unexpected Maker — dual-core 240 MHz LX7, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 21 GPIO, 2× STEMMA connectors, dual LDOs, LiPo charging. [Details](https://openhardware.directory/devices/feathers3-esp32-s3) | [Markdown](https://openhardware.directory/devices/feathers3-esp32-s3/md) ## ProS3 ESP32-S3 Unexpected Maker's ultimate ESP32-S3 dev board — dual-core 240 MHz LX7, 16 MB Flash, 8 MB PSRAM, WiFi, BLE 5, 27 GPIO, 2× LDOs, castellated headers, STEMMA, LiPo charging, JTAG. [Details](https://openhardware.directory/devices/pros3-esp32-s3) | [Markdown](https://openhardware.directory/devices/pros3-esp32-s3/md) ## Adafruit Monster M4SK The Adafruit Monster M4SK is a wearable dual-display Halloween mask board powered by ATSAMD51 Cortex-M4F at 120MHz with 8MB flash, two 240×240 IPS TFT eye displays, stereo audio, microphone, STEMMA connectors, and LiPo battery support for animated eye and mask projects. [Details](https://openhardware.directory/devices/adafruit-monster-m4sk) | [Markdown](https://openhardware.directory/devices/adafruit-monster-m4sk/md) ## Adafruit ESP32-S3 Feather (4MB Flash, 2MB PSRAM) Feather-format ESP32-S3 board with 4 MB flash and 2 MB PSRAM, dual-core 240 MHz, native USB-C, BLE 5, WiFi, STEMMA QT, LiPoly charging, and MAX17048 battery monitor. [Details](https://openhardware.directory/devices/adafruit-esp32-s3-feather-4mb-psram) | [Markdown](https://openhardware.directory/devices/adafruit-esp32-s3-feather-4mb-psram/md) ## Adafruit Metro ESP32-S3 Arduino UNO-compatible Metro board with ESP32-S3 dual-core 240 MHz, 16 MB flash, 8 MB Octal PSRAM, WiFi, BLE 5, native USB-C, STEMMA QT, LiPoly charging, and JTAG debug header. [Details](https://openhardware.directory/devices/adafruit-metro-esp32-s3) | [Markdown](https://openhardware.directory/devices/adafruit-metro-esp32-s3/md) ## Adafruit MagTag The Adafruit MagTag is an ESP32-S2 WiFi e-paper IoT display board featuring a 2.9" 296×128 grayscale e-ink screen, 4 NeoPixels, LIS3DH accelerometer, 4 user buttons, STEMMA QT, USB-C, LiPo charging, and a deep-sleep current of ~250µA — ideal for low-power battery-driven IoT displays. [Details](https://openhardware.directory/devices/adafruit-magtag) | [Markdown](https://openhardware.directory/devices/adafruit-magtag/md) ## Adafruit Feather 32u4 RFM69HCW (868/915 MHz) Feather-format development board combining the ATmega32u4 microcontroller with an RFM69HCW 868/915 MHz packet radio for low-power sub-GHz wireless applications. [Details](https://openhardware.directory/devices/adafruit-feather-32u4-rfm69hcw) | [Markdown](https://openhardware.directory/devices/adafruit-feather-32u4-rfm69hcw/md) ## Adafruit Feather 32u4 RFM96 LoRa (433 MHz) Feather-format development board combining the ATmega32u4 microcontroller with an RFM96 LoRa 433 MHz transceiver for long-range, low-power IoT applications. [Details](https://openhardware.directory/devices/adafruit-feather-32u4-rfm96) | [Markdown](https://openhardware.directory/devices/adafruit-feather-32u4-rfm96/md) ## Adafruit Feather 32u4 RFM95 LoRa (900 MHz) Feather-format development board combining the ATmega32u4 microcontroller with an RFM95 LoRa 868/915 MHz transceiver for long-range, low-power IoT applications. [Details](https://openhardware.directory/devices/adafruit-feather-32u4-rfm95) | [Markdown](https://openhardware.directory/devices/adafruit-feather-32u4-rfm95/md) ## Adafruit ItsyBitsy ESP32 Ultra-compact ESP32 development board in the ItsyBitsy form factor with WiFi, Bluetooth Classic + BLE, USB-C, and LiPo charging — perfect for space-constrained wireless projects. [Details](https://openhardware.directory/devices/adafruit-itsybitsy-esp32) | [Markdown](https://openhardware.directory/devices/adafruit-itsybitsy-esp32/md) ## Adafruit HUZZAH32 ESP32 Feather Board Adafruit's Feather-format ESP32 board with dual-core Xtensa LX6 @ 240MHz, WiFi b/g/n, Bluetooth Classic + BLE 4.2, built-in LiPo charger, and Feather-compatible pin layout. Great all-around wireless IoT platform. [Details](https://openhardware.directory/devices/adafruit-huzzah32-esp32-feather) | [Markdown](https://openhardware.directory/devices/adafruit-huzzah32-esp32-feather/md) ## Adafruit Feather ESP32-S3 Feather-format ESP32-S3 board with native USB, WiFi, BLE 5.0, 8MB flash, LiPo charging, and full Feather ecosystem compatibility — a capable wireless development platform for CircuitPython and Arduino projects. [Details](https://openhardware.directory/devices/adafruit-feather-esp32-s3) | [Markdown](https://openhardware.directory/devices/adafruit-feather-esp32-s3/md) ## Heltec Wireless Stick Lite V3 Compact ESP32-S3 + SX1262 LoRa development board with WiFi, BLE 5.0, and integrated battery management. Meshtastic and LoRaWAN compatible, with a slim stick form factor ideal for IoT sensor nodes and mesh networking. [Details](https://openhardware.directory/devices/heltec-wireless-stick-lite-v3) | [Markdown](https://openhardware.directory/devices/heltec-wireless-stick-lite-v3/md) ## M5Stack FIRE V2.7 Feature-rich ESP32 IoT dev kit with 2.0" IPS display, 8MB PSRAM, 16MB flash, MPU6886 IMU, BMM150 magnetometer, 10x SK6812 RGB LEDs, microphone, speaker, microSD, 500mAh battery, and M5GO charging base. [Details](https://openhardware.directory/devices/m5stack-fire-v2-7) | [Markdown](https://openhardware.directory/devices/m5stack-fire-v2-7/md) ## M5Stack Basic Core V2.7 Compact ESP32 IoT dev kit with 2.0" IPS LCD (320x240), 16MB flash, microSD, speaker, 110mAh battery, and three Grove ports in a stackable 54mm square enclosure. [Details](https://openhardware.directory/devices/m5stack-basic-core-v2-7) | [Markdown](https://openhardware.directory/devices/m5stack-basic-core-v2-7/md) ## Heltec WiFi Kit 8 ESP8266-based IoT development board by Heltec with built-in 0.91-inch OLED display, Li-Po battery management, and WiFi connectivity in a compact 50.9x18.2mm form factor. [Details](https://openhardware.directory/devices/heltec-wifi-kit-8) | [Markdown](https://openhardware.directory/devices/heltec-wifi-kit-8/md) ## M5Stack CoreS3 Lite ESP32-S3 IoT controller with 2.0" capacitive touch IPS display, GC0308 camera, dual microphones, 1W speaker, BMI270 IMU, BMM150 magnetometer, proximity sensor, 200mAh battery, and Grove expansion ports. [Details](https://openhardware.directory/devices/m5stack-cores3-lite) | [Markdown](https://openhardware.directory/devices/m5stack-cores3-lite/md) ## M5Stack Station-Bat Industrial ESP32 controller with 1.14" IPS LCD, 6 Grove ports, INA3221 power monitor, MPU6886 IMU, RTC, 7x SK6812 LEDs, dual 18650 battery holders, USB-A power output, and 16MB flash. [Details](https://openhardware.directory/devices/m5stack-station-bat) | [Markdown](https://openhardware.directory/devices/m5stack-station-bat/md) ## Heltec HT-HC32 Wi-Fi HaLow Camera ESP32-S3 development board with integrated camera and Wi-Fi HaLow (802.11ah) module for long-range wireless video transmission up to 1-2km at speeds up to 32 Mbps. Features USB-C, SD card slot, and LiPo battery charging. [Details](https://openhardware.directory/devices/heltec-ht-hc32) | [Markdown](https://openhardware.directory/devices/heltec-ht-hc32/md) ## Heltec MeshPocket Qi2 magnetic wireless charging power bank with integrated Meshtastic mesh networking node, featuring nRF52840 BLE + SX1262 LoRa radio and a 2.13" e-ink display. Available in 5000mAh and 10000mAh configurations. [Details](https://openhardware.directory/devices/heltec-meshpocket) | [Markdown](https://openhardware.directory/devices/heltec-meshpocket/md) ## Heltec CubeCell AB01 Dev-Board (V2) Ultra-low power LoRa/LoRaWAN development board based on the ASR6502 SiP (ARM Cortex-M0+ @ 48MHz + SX1262), with USB-C, solar panel support, and 3.5uA deep sleep current. Ideal for remote environmental sensing and battery-powered IoT nodes. [Details](https://openhardware.directory/devices/heltec-cubecell-ab01-v2) | [Markdown](https://openhardware.directory/devices/heltec-cubecell-ab01-v2/md) ## Heltec ESP32-C3 Arduino Development Board Ultra-compact RISC-V development board with ESP32-C3FN4, WiFi, BLE 5.0, integrated battery management, and USB-C — ideal for low-power IoT sensor nodes and wireless prototyping. [Details](https://openhardware.directory/devices/heltec-esp32-c3) | [Markdown](https://openhardware.directory/devices/heltec-esp32-c3/md) ## Heltec CubeCell 1/2AA Node (HTCC-AB02A) Ultra-low-power LoRa/LoRaWAN development node based on the ASR6502 SoC (ARM Cortex-M0+ @ 48MHz + SX1262), with a built-in 1/2AA battery holder, 3.5uA deep sleep, and Arduino compatibility. Ideal for remote sensor deployments. [Details](https://openhardware.directory/devices/heltec-cubecell-htcc-ab02a) | [Markdown](https://openhardware.directory/devices/heltec-cubecell-htcc-ab02a/md) ## Heltec WiFi Kit 32 (V3) ESP32-S3-based IoT development board with built-in 0.96" OLED display, lithium battery management, WiFi and Bluetooth 5.0 connectivity, and USB-C interface in a compact 50mm form factor. [Details](https://openhardware.directory/devices/heltec-wifi-kit-32-v3) | [Markdown](https://openhardware.directory/devices/heltec-wifi-kit-32-v3/md) ## Heltec CubeCell GPS-6502 (HTCC-AB02S) LoRa + GPS development board based on ASR6502 SiP (ARM Cortex-M0+ with SX1262), featuring integrated AIR530Z GPS/BeiDou module, 0.96" OLED display, solar charging, and ultra-low 21uA deep sleep current for long-range IoT tracking applications. [Details](https://openhardware.directory/devices/heltec-cubecell-gps-6502-htcc-ab02s) | [Markdown](https://openhardware.directory/devices/heltec-cubecell-gps-6502-htcc-ab02s/md) ## Heltec HT-DE01 Multi Size E-Ink Drive Board A compact universal e-ink driver board based on ESP32-S3FN8 with WiFi and Bluetooth connectivity, 24-pin FFC interface compatible with most e-ink displays, USB-C and LiPo battery support, and Arduino development environment. [Details](https://openhardware.directory/devices/heltec-ht-de01) | [Markdown](https://openhardware.directory/devices/heltec-ht-de01/md) ## Heltec Wireless Tracker V2 ESP32-S3 development board with SX1262 LoRa (28dBm), UC6580 dual-frequency GNSS, 0.96" TFT display, solar charging, and Meshtastic/MeshCore support for GPS tracking and mesh networking. [Details](https://openhardware.directory/devices/heltec-wireless-tracker-v2) | [Markdown](https://openhardware.directory/devices/heltec-wireless-tracker-v2/md) ## Heltec Wireless Bridge ESP32 + SX1276 LoRa multi-protocol bridge in an aluminum enclosure, converting between WiFi, Bluetooth, and LoRa with 8MB flash and 8MB PSRAM. [Details](https://openhardware.directory/devices/heltec-wireless-bridge) | [Markdown](https://openhardware.directory/devices/heltec-wireless-bridge/md) ## Heltec Wireless Tracker ESP32-S3 development board with integrated SX1262 LoRa transceiver, UC6580 dual-frequency GNSS receiver, and 0.96-inch TFT display for IoT asset tracking, Meshtastic mesh networking, and LoRaWAN applications. [Details](https://openhardware.directory/devices/heltec-wireless-tracker) | [Markdown](https://openhardware.directory/devices/heltec-wireless-tracker/md) ## Heltec Capsule Sensor V3 Ultra-compact IP65 waterproof LoRa sensor capsule with ESP32-S3, SX1262 LoRa, GNSS, temperature/humidity, barometric pressure, and 3-axis accelerometer. Meshtastic-compatible with 250mAh battery and over 1 year battery life. [Details](https://openhardware.directory/devices/heltec-capsule-sensor-v3) | [Markdown](https://openhardware.directory/devices/heltec-capsule-sensor-v3/md) ## Heltec Wireless Stick V3 Compact ESP32-S3 development board with integrated SX1262 LoRa transceiver and 0.49-inch OLED display. Supports Meshtastic, LoRaWAN, WiFi, and BLE 5.0 in a breadboard-friendly form factor with battery management. [Details](https://openhardware.directory/devices/heltec-wireless-stick-v3) | [Markdown](https://openhardware.directory/devices/heltec-wireless-stick-v3/md) ## Heltec Vision Master E213 ESP32-S3 development board with 2.13-inch E-Paper display and optional SX1262 LoRa radio, supporting Meshtastic, LoRaWAN, Arduino, and MicroPython. Features WiFi, BLE 5.0, ultra-low 20uA deep sleep, lithium battery management, and dual SH2.0 sensor ports. [Details](https://openhardware.directory/devices/heltec-vision-master-e213) | [Markdown](https://openhardware.directory/devices/heltec-vision-master-e213/md) ## Heltec Vision Master E290 ESP32-S3 development board with 2.9-inch e-ink display and optional SX1262 LoRa radio, featuring Raspberry Pi GPIO header, Meshtastic support, and 18uA deep sleep for battery-powered IoT and mesh networking applications. [Details](https://openhardware.directory/devices/heltec-vision-master-e290) | [Markdown](https://openhardware.directory/devices/heltec-vision-master-e290/md) ## Heltec Vision Master T190 ESP32-S3 development board with optional SX1262 LoRa module and 1.9-inch TFT color display. Supports Meshtastic, LoRaWAN, Arduino, MicroPython, and features integrated battery management with 18uA deep sleep. [Details](https://openhardware.directory/devices/heltec-vision-master-t190) | [Markdown](https://openhardware.directory/devices/heltec-vision-master-t190/md) ## Heltec Wireless Paper ESP32-S3 + SX1262 LoRa E-Ink development board with 2.13" e-paper display, WiFi, BLE 5.0, and LoRa connectivity. Designed for electronic shelf labels, Meshtastic mesh nodes, and low-power IoT sensor displays. [Details](https://openhardware.directory/devices/heltec-wireless-paper) | [Markdown](https://openhardware.directory/devices/heltec-wireless-paper/md) ## Heltec Mesh Node T114 Compact nRF52840 + SX1262 LoRa development board with BLE 5.0, optional 1.14" TFT display and L76K GPS module. Designed for Meshtastic mesh networking, LoRaWAN, and battery-powered IoT deployments with ultra-low 11uA deep sleep current and solar panel support. [Details](https://openhardware.directory/devices/heltec-mesh-node-t114) | [Markdown](https://openhardware.directory/devices/heltec-mesh-node-t114/md) ## CubeCell Dev-Board Plus (HTCC-AB02) Heltec CubeCell HTCC-AB02 is an ultra-low-power LoRa/LoRaWAN development board based on the ASR6502 SoC (ARM Cortex-M0+ with integrated SX1262), featuring a 0.96" OLED display, solar panel input, and lithium battery management. Ideal for long-range IoT sensor nodes and agricultural monitoring. [Details](https://openhardware.directory/devices/heltec-cubecell-htcc-ab02) | [Markdown](https://openhardware.directory/devices/heltec-cubecell-htcc-ab02/md) ## Heltec Turtle Board Ultra-low-power LoRa development board with STM32L432KC ARM Cortex-M4 MCU and SX1276 transceiver, capable of 10-year battery life on AAA cells using the RadioShuttle peer-to-peer protocol. [Details](https://openhardware.directory/devices/heltec-turtle-board) | [Markdown](https://openhardware.directory/devices/heltec-turtle-board/md) ## Heltec LoRa Kit 151 Ultra-low-power LoRaWAN development kit based on STM32L151CBU6 ARM Cortex-M3 MCU and Semtech SX1278 LoRa transceiver, with 6uA deep sleep current, integrated battery management, and CE certification. [Details](https://openhardware.directory/devices/heltec-lora-kit-151) | [Markdown](https://openhardware.directory/devices/heltec-lora-kit-151/md)